This is my third and final comments on Feynman’s popular little booklet: *The* *Strange Theory of Light and Matter*, also known as Feynman’s *Lectures on Quantum Electrodynamics *(QED).

The origin of this short lecture series is quite moving: the death of Alix G. Mautner, a good friend of Feynman’s. She was always curious about physics but her career was in English literature and so she did not manage the math. Hence, Feynman introduces this 1985 publication by writing: “Here are the lectures I really prepared for Alix, but unfortunately I can’t tell them to her directly, now.”

Alix Mautner died from a brain tumor, and it is her husband, Leonard Mautner, who sponsored the QED lectures series at the UCLA, which Ralph Leigton transcribed and published as the booklet that we’re talking about here. Feynman himself died a few years later, at the relatively young age of 69. Tragic coincidence: he died of cancer too. Despite all this weirdness, Feynman’s QED never quite got the same iconic* *status of, let’s say, Stephen Hawking’s *Brief History of Time*. I wonder why, but the answer to that question is probably in the realm of chaos theory. 🙂 I actually just saw the movie on Stephen Hawking’s life (*The Theory of Everything*), and I noted another strange coincidence: Jane Wilde, Hawking’s first wife, also has a PhD in literature. It strikes me that, while the movie documents that Jane Wilde gave Hawking three children, after which he divorced her to marry his nurse, Elaine, the movie does not mention that he separated from Elaine too, and that he has some kind of ‘working relationship’ with Jane again.

Hmm… What to say? I should get back to quantum mechanics here or, to be precise, to quantum electrodynamics.

One reason why Feynman’s *Strange Theory of Light and Matter *did not sell like Hawking’s *Brief History of Time*, might well be that, in some places, *the text is not entirely accurate*. Why? Who knows? It would make for an interesting PhD thesis in History of Science. Unfortunately, I have no time for such PhD thesis. Hence, I must assume that Richard Feynman simply didn’t have much time or energy left to correct some of the writing of *Ralph Leighton*, who transcribed and edited these four short lectures a few years before Feynman’s death. Indeed, when everything is said and done, Ralph Leighton is *not *a physicist and, hence, I think he did compromise – just a little bit – on accuracy for the sake of readability. Ralph Leighton’s father, *Robert Leighton*, an eminent physicist who worked with Feynman, would probably have done a much better job.

I feel that one should not* *compromise on accuracy, even when trying to write something reader-friendly. That’s why I am writing this blog, and why I am writing three posts specifically on this little booklet. Indeed, while I’d warmly recommend that little book on QED as an excellent non-mathematical introduction to the weird world of quantum mechanics, I’d also say that, while Ralph Leighton’s story is great, it’s also, in some places, not *entirely* accurate indeed.

So… Well… I want to do better than Ralph Leighton here. Nothing more. Nothing less. 🙂 Let’s go for it.

**I. Probability amplitudes: what are they?**

The greatest achievement of that little QED publication is that it manages to avoid any reference to wave functions and other complicated mathematical constructs: all of the complexity of quantum mechanics is reduced to three basic *events *or actions and, hence, three basic *amplitudes* which are represented as ‘arrows’—literally.

Now… Well… You may or may not know that a (probability) amplitude is actually a *complex number*, but it’s not so easy to intuitively understand the concept of a complex number. In contrast, everyone easily ‘gets’ the concept of an ‘arrow’. Hence, from a pedagogical point of view, representing complex numbers by some ‘arrow’ is truly a stroke of genius.

Whatever we call it, a complex number or an ‘arrow’, a probability amplitude is something with (a) a **magnitude** and (b) a **phase**. As such, it resembles a vector, but it’s not quite the same, if only because we’ll impose some restrictions on the magnitude. But I shouldn’t get ahead of myself. Let’s start with the basics.

A **magnitude** is some *real positive *number, like a *length*, but you should *not *associate it with some *spatial* dimension in physical space: it’s just a number. As for the **phase**, we could associate that concept with some *direction* but, again, you should just think of it as a direction in a *mathematical *space, not in the *real* (physical) space.

Let me insert a parenthesis here. If I say the ‘real’ or ‘physical’ space, I mean the space in which the electrons and photons and all other real-life objects that we’re looking at *exist* and *move*. That’s a non-mathematical definition. In fact, in math, the real space is defined as a coordinate space, with sets of real numbers (vectors) as coordinates, so… Well… That’s a mathematical space only, not the ‘real’ (physical) space. So the real (vector) space is not real. 🙂 The mathematical real space *may*, or may not, accurately *describe *the real (physical) space. Indeed, you may have heard that physical space is curved because of the presence of massive objects, which means that the real coordinate space will actually *not *describe it very accurately. I know that’s a bit confusing but I hope you understand what I mean: if mathematicians talk about the real space, they do not mean the real space. They refer to a vector space, i.e. a mathematical construct. To avoid confusion, I’ll use the term ‘*physical* space’ rather than ‘real’ space in the future. So I’ll let the mathematicians get away with using the term ‘real space’ for something that isn’t real actually. 🙂

End of digression. Let’s discuss these two mathematical concepts – magnitude and phase – somewhat more in detail.

**A. The magnitude**

Let’s start with the **magnitude** or ‘length’ of our arrow. We know that we have to *square *these lengths to find some probability, i.e. some real number between 0 and 1. Hence, the length of our arrows cannot be larger than one. That’s the restriction I mentioned already, and this ‘normalization’ condition reinforces the point that these ‘arrows’ do not have any spatial dimension (not in any *real *space anyway): they represent a *function*. To be specific, they represent a wavefunction.

If we’d be talking complex numbers instead of ‘arrows’, we’d say the *absolute value *of the complex number cannot be larger than one. We’d also say that, to find the probability, we should take the *absolute *square of the complex number, so that’s the square of the magnitude or absolute value of the complex number indeed. We cannot just square the complex number: it has to be the *square of the absolute value*.

Why? Well… Just write it out. [You can skip this section if you’re not interested in complex numbers, but I would recommend you try to understand. It’s not that difficult. Indeed, if you’re reading this, you’re most likely to understand *something *of complex numbers and, hence, you should be able to work your way through it. Just remember that a complex number is like a two-dimensional number, which is why it’s *sometimes* written using bold-face (**z**), rather than regular font (z). However, I should immediately add this convention is usually *not *followed. I like the boldface though, and so I’ll try to use it in this post.] The square of a complex number **z** = a + b*i* is equal to** z**^{2 }= a^{2 }+ 2ab*i* – b^{2}, while the square of its *absolute value *(i.e. the absolute square) is |**z**|^{2 }= [√(a^{2 }+ b^{2})]^{2} = a^{2 }+ b^{2}. So you can immediately see that the square and the absolute square of a complex numbers are two *very* different things indeed: it’s not only the 2ab*i* term, but there’s also the minus sign in the first expression, because of the *i*^{2 }= –1 factor. In case of doubt, always remember that the square of a complex number may actually yield a *negative *number, as evidenced by the definition of the imaginary unit itself: *i*^{2 }= –1.

End of digression. Feynman and Leighton manage to avoid any reference to complex numbers in that short series of four lectures and, hence, all they need to do is explain how one squares a length. Kids learn how to do that when making a square out of rectangular paper: they’ll fold one corner of the paper until it meets the opposite edge, forming a triangle first. They’ll then cut or tear off the extra paper, and then unfold. Done. [I could note that the folding is a 90 degree rotation of the original length (or width, I should say) which, in mathematical terms, is equivalent to multiplying that length with the imaginary unit (*i*). But I am sure the kids involved would think I am crazy if I’d say this. 🙂 So let me get back to Feynman’s arrows.

**B. The phase**

Feynman and Leighton’s second pedagogical stroke of genius is the metaphor of the ‘stopwatch’ and the ‘stopwatch hand’ for the variable ** phase**. Indeed, although I think it’s worth explaining why

**z**= a + b

*i*= r

*cos*φ +

*i*r

*sin*φ in the illustration below can be written as

**z**= r

*e*

^{iφ }= |

**z**|

*e*

^{iφ}, understanding Euler’s representation of complex number as a complex

*exponential*requires swallowing a

*very*substantial piece of math and, if you’d want to do that, I’ll refer you to one of my posts on complex numbers).

The metaphor of the stopwatch represents a periodic function. To be precise, it represents a *sinusoid*, i.e. a smooth repetitive oscillation. Now, the stopwatch *hand *represents the *phase* of that function, i.e. the φ angle in the illustration above. That angle is a function of time: **the speed with which the stopwatch turns is related to some frequency**, i.e. the number of oscillations per unit of time (i.e. per second).

You should now wonder: what frequency? What oscillations are we talking about here? Well… As we’re talking photons and electrons here, we should distinguish the two:

- For photons, the frequency is given by Planck’s energy-frequency relation, which relates the energy (E) of a photon (1.5 to 3.5 eV for visible light) to its frequency (ν). It’s a simple proportional relation, with Planck’s constant (
*h*) as the proportionality constant: E =*h*ν, or ν = E/*h.* - For electrons, we have the
*de Broglie*relation, which looks similar to the Planck relation (E =*h*f, or f = E/*h*) but, as you know, it’s something different. Indeed, these so-called*matter waves*are not so easy to interpret because there actually is**no**f. In fact, the matter wave representing some particle in space will consist of a potentially infinite number of waves, all superimposed one over another, as illustrated below.*precise*frequency

For the sake of accuracy, I should mention that the animation above has its limitations: the wavetrain is complex-valued and, hence, has a real as well as an imaginary part, so it’s something like the blob underneath. Two functions in one, so to speak: the imaginary part follows the real part with a phase difference of 90 degrees (or π/2 radians). Indeed, if the wavefunction is a regular complex exponential r*e*^{iθ}, then r*sin*(φ–π/2) = r*cos*(φ), which proves the point: we have two functions in one here. 🙂 I am actually just repeating what I said before already: the probability amplitude, or the wavefunction, is a complex number. You’ll usually see it written as Ψ (psi) or Φ (phi). Here also, using boldface (**Ψ** or **Φ** instead of Ψ or Φ) would usefully remind the reader that we’re talking something ‘two-dimensional’ (in mathematical space, that is), but this convention is usually *not *followed.

In any case… Back to frequencies. The point to note is that, when it comes to analyzing electrons (or any other matter-particle), we’re dealing with a *range* of frequencies f really (or, what amounts to the same, a *range* of wavelengths λ) and, hence, we should write Δf = ΔE/*h*, which is just one of the many expressions of the Uncertainty Principle in quantum mechanics.

Now, that’s just one of the complications. Another difficulty is that matter-particles, such as electrons, have some *rest mass*, and so that enters the energy equation as well (literally). Last but not least, one should distinguish between the group velocity and the phase velocity of matter waves. As you can imagine, that makes for a *very *complicated relationship between ‘the’ wavelength and ‘the’ frequency. In fact, what I write above should make it abundantly clear that there’s no such thing as *the* wavelength, or *the* frequency: it’s a range really, related to the fundamental uncertainty in quantum physics. I’ll come back to that, and so you shouldn’t worry about it here. Just note that the stopwatch metaphor doesn’t work very well for an electron!

In his *postmortem* lectures for Alix Mautner, Feynman avoids all these complications. Frankly, I think that’s a missed opportunity because I do *not *think it’s all that incomprehensible. In fact, I write all that follows because I do want you to understand the basics of waves. It’s not difficult. High-school math is enough here. Let’s go for it.

One turn of the stopwatch corresponds to one cycle. One cycle, or 1 Hz (i.e. one oscillation per second) covers 360 degrees or, to use a more natural unit, 2π *radians*. [Why is radian a more natural unit? Because it measures an angle in terms of the distance unit itself, rather than in arbitrary 1/360 cuts of a full circle. Indeed, remember that the circumference of the unit circle is 2π.] So our frequency ν (expressed in cycles per second) corresponds to a so-called *angular* frequency ω = 2πν. From this formula, it should be obvious that ω is measured in radians per second.

We can also link this formula to the *period *of the oscillation, T, i.e. the *duration* of one cycle. T = 1/ν and, hence, ω = 2π/T. It’s all nicely illustrated below. [And, yes, it’s an animation from Wikipedia: nice and simple.]

The easy math above now allows us to formally write the phase of a wavefunction – let’s denote the wavefunction as φ (phi), and the phase as θ (theta) – as a function of time (t) using the angular frequency ω. So we can write: θ = ωt = 2π·ν·t. Now, the wave travels through space, and the two illustrations above (i.e. the one with the super-imposed waves, and the one with the complex wave train) would usually represent a wave *shape *at some fixed point in time. Hence, the horizontal axis is not t but x. Hence, we can and should write the phase not only as a function of time but also of space. So how do we do that? Well… If the hypothesis is that the wave travels through space at some *fixed *speed *c*, then its frequency ν will also determine its *wavelength* λ. It’s a simple relationship: *c* = λν (the number of oscillations *per second *times the length of one wavelength should give you the distance traveled per second, so that’s, effectively, the wave’s speed).

Now that we’ve expressed the frequency in *radians *per second, we can also express the wavelength in radians* per unit distance* too. That’s what the wavenumber does: think of it as the *spatial* frequency of the wave. We denote the wavenumber by k, and write: k = 2π/λ. [Just do a numerical example when you have difficulty following. For example, if you’d assume the wavelength is 5 units distance (i.e. 5 *meter*) – that’s a typical VHF radio frequency: ν = (3×10^{8 }m/s)/(5 m) = 0.6×10^{8 }Hz = 60 MHz – then that would correspond to (2π radians)/(5 m) ≈ 1.2566 radians* per meter*. Of course, we can also express the wave number in *oscillations *per unit distance. In that case, we’d have to divide k by 2π, because one cycle corresponds to 2π radians. So we get the reciprocal of the wavelength: 1/λ. In our example, 1/λ is, of course, 1/5 = 0.2, so that’s a fifth of a full cycle. You can also think of it as the number of waves (or wavelengths) per meter: if the wavelength is λ, then one can fit 1/λ waves in a meter.

Now, from the ω = 2πν, *c* = λν and k = 2π/λ relations, it’s obvious that k = 2π/λ = 2π/(*c*/ν) = (2πν)/*c* = ω/*c. *To sum it all up, frequencies and wavelengths, *in time and in space*, are all related through the speed of propagation of the wave *c*. More specifically, they’re related as follows:

*c* = λν = ω/k

From that, it’s easy to see that k = ω/*c*, which we’ll use in a moment. Now, it’s obvious that the periodicity of the wave implies that we can find the same phase by going one oscillation (or a multiple number of oscillations back or forward in time, or in space. In fact, we can also find the same phase by letting *both* time and space vary. However, if we want to do that, it should be obvious that we should either (a) go *forward* in space and *back* in time or, alternatively, (b) go *back* in space and *forward* in time. In other words, if we want to get the same phase, then time and space sort of substitute for each other. Let me quote Feynman on this: “This is easily seen by considering the mathematical behavior of a(t−r/c). Evidently, if we add a little time Δt, we get the same value for a(t−r/c) as we would have if we had subtracted a little distance: Δr = −*c*Δt.” The variable a stands for the acceleration of an electric charge here, causing an electromagnetic wave, but the same logic is valid for the phase, with a minor twist though: we’re talking a nice periodic function here, and so we need to put the angular frequency in front. Hence, the rate of change of the phase in respect to time is measured by the angular frequency ω. In short, we write:

θ = ω(t–x/c) = ωt–kx

Hence, we can re-write the wavefunction, in terms of its phase, as follows:

φ(θ) = φ[θ(x, t)] = φ[ωt–kx]

Note that, if the wave would be traveling in the ‘other’ direction (i.e. in the *negative *x-direction), we’d write φ(θ) = φ[kx+ωt]. Time travels in one direction only, of course, but so one minus sign has to be there because of the logic involved in adding time and subtracting distance. You can work out an example (with a sine or cosine wave, for example) for yourself.

So what, you’ll say? Well… Nothing. I just hope you agree that all of this isn’t rocket science: it’s just high-school math. But so it shows you what that stopwatch really is and, hence, *I *– but who am I? – would have put at least one or two footnotes on this in a text like Feynman’s QED.

Now, let me make a much longer and more serious digression:

**Digression 1: on relativity and spacetime**

As you can see from the argument (or phase) of that wave function φ(θ) = φ[θ(x, t)] = φ[ωt–kx] = φ[–k(x–*c*t)], any wave equation establishes a deep relation between the wave itself (i.e. the ‘thing’ we’re describing) and space and time. In fact, that’s what the whole wave equation is all about! So let me say a few things more about that.

Because you know a thing or two about physics, you may ask: when we’re talking time, *whose time *are we talking about? Indeed, if we’re talking photons going from A to B, these photons will be traveling at or near the speed of light and, hence, *their *clock, as seen from our (inertial) frame of reference, doesn’t move. Likewise, according to the photon, *our *clock seems to be standing still.

Let me put the issue to bed immediately: we’re looking at things from *our* point of view. Hence, we’re obviously using *our *clock, not theirs. Having said that, the analysis is actually fully consistent with relativity theory. Why? Well… What do you expect? If it wasn’t, the analysis would obviously *not *be valid. 🙂 To illustrate that it’s consistent with relativity theory, I can mention, for example, that the (probability) amplitude for a photon to travel from point A to B depends on the *spacetime interval*, which is invariant. Hence, A and B are four-dimensional points in *spacetime*, involving both spatial as well as time coordinates: A = (x_{A}, y_{A}, z_{A}, t_{A}) and B = (x_{B}, y_{B}, z_{B}, t_{B}). And so the ‘distance’ – as measured through the spacetime interval – is invariant.

Now, having said that, we should draw some attention to the intimate relationship between space and time which, let me remind you, results from the *absoluteness* of the speed of light. Indeed, one will always measure the speed of light *c* as being equal to 299,792,458 m/s, *always and everywhere. *It does *not *depend on your reference frame (inertial or moving). That’s why the constant *c* anchors all laws in physics, and why we can write what we write above, i.e. include both distance (x) as well as time (t) in the wave function φ = φ(x, t) = φ[ωt–kx] = φ[–k(x–*c*t)]. The k and ω are related through the ω/k = *c *relationship: the speed of light links the frequency *in time* (ν = ω/2π* *= 1/T) with the frequency *in space* (i.e. the wavenumber or *spatial frequency* k). There is only degree of freedom here: the frequency—in space or in time, it doesn’t matter: ν and ω are *not *independent. [As noted above, the relationship between the frequency in time and in space is *not *so obvious for electrons, or for matter waves in general: for those matter-waves, we need to distinguish group and phase velocity, and so we don’t have a unique frequency.]

Let me make another small digression within the digression here. Thinking about travel at the speed of light invariably leads to paradoxes. In previous posts, I explained the mechanism of light emission: a photon is emitted – *one* photon *only *– when an electron jumps back to its ground state after being excited. Hence, we may imagine a photon as a transient electromagnetic wave–something like what’s pictured below. Now, the *decay time *of this transient oscillation (τ) is measured in *nano*seconds, i.e. billionths of a second (1 ns = 1×10^{–9 }s): the decay time for sodium light, for example, is some 30 ns only.

However, because of the tremendous speed of light, that still makes for a wave*train *that’s like ten meter long, at least (30×10^{–9 }s times 3×10^{8 }m/s is nine meter, but you should note that the decay time measures the time for the oscillation to die out *by a factor *1/*e*, so the oscillation itself lasts longer than that). Those nine or ten meters cover like 16 to 17 *million* oscillations (the wavelength of sodium light is about 600 nm and, hence, 10 meter fits almost 17 million oscillations indeed). Now, **how can we reconcile the image of a photon as a ten-meter long wavetrain with the image of a photon as a point particle?**

The answer to that question is paradoxical: from *our *perspective, anything traveling at the speed of light – including this nine or ten meter ‘long’ photon – will have zero length because of the relativistic length contraction effect. Length contraction? Yes. I’ll let you look it up, because… Well… It’s not easy to grasp. Indeed, from the three measurable effects on objects moving at relativistic speeds – i.e. (1) an increase of the mass (the energy needed to further accelerate particles in particle accelerators increases dramatically at speeds nearer to *c*), (2) time dilation, i.e. a slowing down of the (internal) clock (because of their relativistic speeds when entering the Earth’s atmosphere, the measured half-life of *muons* is *five *times that when at rest), and (3) length contraction – length contraction is probably the most paradoxical of all.

Let me end this digression with yet another short note. I said that one will always measure the speed of light *c* as being equal to 299,792,458 m/s, *always and everywhere *and, hence, that it does *not *depend on your reference frame (inertial or moving). Well… That’s true and not true at the same time. I actually need to nuance that statement a bit in light of what follows: an *individual *photon does have an amplitude to travel faster or slower than *c*, and when discussing matter waves (such as the wavefunction that’s associated with an electron), we can have *phase* velocities that are faster than light! However, when calculating those amplitudes, *c *is a constant.

That doesn’t make sense, you’ll say. Well… What can I say? That’s how it is unfortunately. I need to move on and, hence, I’ll end this digression and get back to the main story line. Part I explained what probability amplitudes are—or at least tried to do so. Now it’s time for part II: the building blocks of all of quantum electrodynamics (QED).

**II. The building blocks: P(A to B), E(A to B) and j**

The three basic ‘events’ (and, hence, amplitudes) in QED are the following:

**1.** **P(A to B)**

**P(A to B) is the (probability) amplitude for a photon to travel from point A to B**. However, I should immediately note that A and B are points in

*spacetime*. Therefore, we associate them not only with some specific (x, y, z) position in space, but also with a some specific time t. Now, quantum-mechanical theory gives us an easy formula for P(A to B): it depends on the so-called (spacetime)

*interval*between the two points A and B, i.e.

*I*= Δ

*r*

^{2 }– Δ

*t*

^{2 }= (x

_{2}–x

_{1})

^{2}+(y

_{2}–y

_{1})

^{2}+(z

_{2}–z

_{1})

^{2 }– (t

_{2}–t

_{1})

^{2}.

*The point to note is that the spacetime interval takes both the distance in space as well as the ‘distance’ in time into account.*As I mentioned already, this spacetime interval does not depend on our reference frame and, hence, it’s invariant (as long as we’re talking reference frames that move with constant speed relative to each other). Also note that we should measure time and distance in equivalent units when using that Δ

*r*

^{2 }– Δ

*t*

^{2 }formula for

*I*. So we either measure distance in light-seconds or, else, we measure time in units that correspond to the time that’s needed for light to travel one meter. If no equivalent units are adopted, the formula is

*I*= Δ

*r*

^{2 }–

*c*·Δ

*t*

^{2}.

Now, in quantum theory, anything is possible and, hence, not only do we allow for crooked paths, but we also allow for the difference in time to *differ* from the time you’d expect a photon to need to travel along some curve (whose length we’ll denote by *l*), i.e. *l*/*c*. Hence, our photon may actually travel slower or faster than the speed of light *c*! There is one lucky break, however, that makes all come out alright: it’s easy to show that the amplitudes associated with the odd paths and strange timings *generally *cancel each other out. [That’s what the QED booklet shows.] Hence, what remains, are the paths that are equal or, importantly, those that *very** near to* the so-called ‘light-like’ intervals in spacetime only. The *net *result is that light – even one single photon – effectively uses a (very) small core of space as it travels, as evidenced by the fact that even one single photon interferes *with itself *when traveling through a slit or a small hole!

[If you now wonder what it means for a photon to interfere for itself, let me just give you the easy explanation: it may change its path. We assume it was traveling in a straight line – if only because it left the source at some point in time and then arrived at the slit obviously – but so it no longer travels in a straight line after going through the slit. So that’s what we mean here.]

**2.** **E(A to B)**

**E(A to B) is the (probability) amplitude for an electron to travel from point A to B.** The formula for E(A to B) is much more complicated, and it’s the one I want to discuss somewhat more in detail in this post. It depends on some complex number

**(see the next remark) and some real number**

*j**n*.

**3. j**

Finally, **an electron could emit or absorb a photon, and the amplitude associated with this event is denoted by j**, for

**unction number. It’s the same number**

*j***as the one mentioned when discussing E(A to B) above.**

*j*Now, this junction number is often referred to as the coupling constant or the *fine-structure* constant. However, the truth is, as I pointed out in my previous post, that these numbers are *related*, but they are not quite the same: α is the *square *of ** j**, so we have α =

*j*^{2}. There is also one more, related, number: the

*gauge*

*parameter*, which is denoted by g (despite the g notation, it has nothing to do with gravitation). The value of g is the square root of 4πε

_{0}α, so g

^{2 }= 4πε

_{0}α. I’ll come back to this. Let me first make an awfully long digression on the fine-structure constant. It will be awfully long. So long that it’s actually part of the ‘core’ of this post actually.

**Digression 2: on the fine-structure constant, Planck units and the Bohr radius**

The value for ** j** is approximately

*–0.08542454.*

How do we know that?

The easy answer to that question is: physicists *measured* it. In fact, they usually publish the measured value as the *square root* of the (absolute value) of ** j**, which is that fine-structure constant α. Its value is published (and updated) by the US National Institute on Standards and Technology. To be precise, the currently accepted value of

*α*is 7.29735257×10

^{−3}. In case you doubt, just check that square root:

** j** = –0.08542454 ≈ –√0.00729735257 = –√α

As noted in Feynman’s (or Leighton’s) QED, older and/or more popular books will usually mention 1/α as the ‘magical’ number, so the ‘special’ number you may have seen is the *inverse *fine-structure constant, which is *about* 137, but not quite:

1/α = 137.035999074 ± 0.000000044

I am adding the standard uncertainty just to give you an idea of how precise these measurements are. 🙂 About 0.32 parts per billion (just divide the 137.035999074 number by the uncertainty). So *that*‘s the number that excites popular writers, including Leighton. Indeed, as Leighton puts it:

“Where does this number come from? Nobody knows. It’s one of the *greatest* damn mysteries of physics: a *magic number* that comes to us with no understanding by man. You might say the “hand of God” wrote that number, and “we don’t know how He pushed his pencil.” We know what kind of a dance to do experimentally to measure this number very accurately, but we don’t know what kind of dance to do on the computer to make this number come out, without putting it in secretly!”

Is it Leighton, or did Feynman really *say* this? Not sure. While the fine-structure constant is a *very* special number, it’s not the only ‘special’ number. In fact, we *derive* it from other ‘magical’ numbers. To be specific, I’ll show you how we derive it from the fundamental *properties* – as *measured*, of course – of the electron. So, in fact, I should say that we *do *know how to make this number come out, which makes me doubt whether Feynman really said what Leighton said he said. 🙂

So we *can *derive α from some other numbers. That brings me to the more complicated answer to the question as to what the value of ** j** really is:

**j**‘s value is the electron charge*expressed in Planck units*, which I’ll denote by –e

*:*

_{P}** j** = –e

_{P}[You may want to reflect on this, and quickly verify on the Web. The Planck unit of electric charge, expressed in *Coulomb*, is about 1.87555×10^{–18 }C. If you multiply that ** j** = –e

*, so with –0.08542454, you get the right answer: the electron charge is about –0.160217×10*

_{P}^{–18 }C.]

Now * that *is strange.

Why? Well… For starters, when doing all those quantum-mechanical calculations, we like to think of ** j** as a dimensionless number: a coupling constant. But so here we do have a dimension: electric charge.

Let’s look at the basics. If ** j **is –√α, and it’s also equal to –e

*, then the fine-structure constant must also be equal to the square of the electron charge e*

_{P}*, so we can write:*

_{P}α = e_{P}^{2}

You’ll say: yes, so what? Well… I am pretty sure that, if you’ve ever seen a formula for α, it’s surely *not *this simple ** j** = –e

*or α = e*

_{P}_{P}

^{2}formula. What you’ve seen, most likely, is one or more of the following expressions below :

That’s a pretty impressive collection of physical constants, isn’t it? 🙂 They’re all different but, somehow, when we combine them in one or the other ratio (we have not less than *five *different expressions here (each identity is a separate expression), and I could give you a few more!), we get the very same number: α. Now * that *is what I call strange.

*Truly*strange.

*Incomprehensibly*

*weird!*

You’ll say… Well… Those constants must all be related… *Of course! *That’s exactly the point I am making here. They are, but look how different they are: m_{e }measures mass, r_{e }measures distance, e is a charge, and so these are all *very different* numbers with *very different* dimensions. Yet, somehow, they are all related through this α number. Frankly, I do not know of any other expression that better illustrates some kind of underlying unity in Nature than the one with those five identities above.

Let’s have a closer look at those constants. You know most of them already. The only constants you may *not* have seen before are μ_{0}, *R*_{K }and, perhaps, *r*_{e }as well as *m*_{e }. However, these can easily be defined as some easy function of the constants that you *did *see before, so let me quickly do that:

- The μ
_{0}constant is the so-called magnetic constant. It’s something similar as ε_{0}and it’s referred to as the*magnetic*permeability of the vacuum. So it’s just like the (electric)*permittivity of the vacuum*(i.e. the electric constant ε_{0}) and the only reason why this blog hasn’t mentioned this constant before is because I haven’t really discussed*magnetic*fields so far. I only talked about the electric field vector. In any case, you know that the electric and magnetic force are part and parcel of the same phenomenon (i.e. the*electromagnetic*interaction between charged particles) and, hence, they are closely related. To be precise, μ_{0}ε_{0}= 1/*c*^{2 }=*c*^{–2}. So that shows the first and second expression for α are, effectively, fully equivalent. [Just in case you’d doubt that μ_{0}ε_{0}= 1/*c*^{2}, let me give you the values: μ_{0}= 4π·10^{–7 }N/A^{2}, and ε_{0}= (1/4π·*c*^{2})·10^{7 }C^{2}/N·m^{2}. Just plug them in, and you’ll see it’s bang on. Moreover, note that the*ampere*(A) unit is equal to the coulomb per second unit (C/s), so even the units come out alright. 🙂 Of course they do!] - The k
_{e}constant is the Coulomb constant and, from its definition k_{e}= 1/4πε_{0}, it’s easy to see how those two expressions are, in turn, equivalent with the third expression for α. - The
*R*_{K }constant is the so-called*von Klitzing*constant.Yes. I know. I am pretty sure you’ve**Huh?***never ever*heard of that one before. Don’t worry about it. It’s, quite simply, equal to*R*_{K }=*h*/e^{2}. Hence, substituting (and don’t forget that*h*= 2π*ħ*) will demonstrate the equivalence of the fourth expression for α. - Finally, the
*r*_{e}factor is the classical electron radius, which is usually written as a function of*m*_{e}, i.e. the electron mass:*r*_{e}= e^{2}/4πε_{0}*m*_{e}*c*^{2}. Also note that this also implies that*r*_{e}*m*_{e}= e^{2}/4πε_{0}*c*^{2}. In words: the product of the electron mass and the electron radius is equal to some constant involving the electron (e), the electric constant (ε_{0}), and*c*(the speed of light).

I am sure you’re under some kind of ‘formula shock’ now. But you should just take a deep breath and read on. The point to note is that all these *very *different things are all related through α.

So, again, what ** is **that α really? Well… A strange number indeed. It’s dimensionless (so we don’t measure in kg, m/s, eV·s or whatever) and it pops up everywhere. [Of course, you’ll say: “What’s

*everywhere*? This is the first time

*‘ve heard of it!” :-)]*

**I**Well… Let me start by explaining the term itself. The *fine structure *in the name refers to the splitting of the spectral lines of atoms. That’s a very fine structure indeed. 🙂 We also have a so-called hyperfine structure. Both are illustrated below for the* hydrogen *atom. The numbers n, *J*, *I*, and *F *are quantum numbers used in the quantum-mechanical explanation of the emission spectrum, which is also depicted below, but note that the illustration gives you the so-called Balmer series only, i.e. the colors in the *visible* light spectrum (there are many more ‘colors’ in the high-energy ultraviolet and the low-energy infrared range).

To be precise: (1) *n *is the principal quantum number: here it takes the values 1 or 2, and we could say these are the principal shells; (2) the S, P, D,… orbitals (which are usually written in lower case: *s*, *p*, *d*, *f*, *g*, *h* and *i*) correspond to the (orbital) angular momentum quantum number *l* = 0, 1, 2,…, so we could say it’s the subshell; (3) the *J *values correspond to the so-called magnetic quantum number m, which goes from –*l* to +*l*; (4) the fourth quantum number is the *spin *angular momentum *s*. I’ve copied another diagram below so you see how it works, *more or less*, that is.

Now, our fine-structure constant is related to these quantum numbers. How exactly is a bit of a long story, and so I’ll just copy Wikipedia’s summary on this: ” The *gross* structure of line spectra is the line spectra predicted by the quantum mechanics of non-relativistic electrons with no spin. For a hydrogenic atom, the gross structure energy levels only depend on the principal quantum number n. However, a more accurate model takes into account relativistic and spin effects, which break the degeneracy of the the energy levels and split the spectral lines. The scale of the fine structure splitting relative to the gross structure energies is on the order of (*Zα*)^{2}, where *Z* is the atomic number and α is the fine-structure constant.” There you go. You’ll say: so what? Well… Nothing. If you aren’t amazed by that, you should stop reading this.

It *is* an ‘amazing’ number, indeed, and, hence, it does quality for being “one of the *greatest* damn mysteries of physics”, as Feynman and/or Leighton put it. Having said that, I would not go as far as to write that it’s “a magic number *that comes to us with no understanding by man.*” In fact, I think Feynman/Leighton could have done a much better job when explaining what it’s all about. So, yes, *I* hope to do better than Leighton here and, as he’s still alive, I actually hope he reads this. 🙂

**The point is: α is not the only weird number.**

**What’s particular about it, as a physical constant, is that it’s**Having said that, the Planck or Boltzmann constant are at least as weird.

*dimensionless*, because it relates a number of*other*physical constants in such a way that the units fall away.So… What is this all about? Well… You’ve probably heard about the so-called *fine-tuning *problem in physics and, if you’re like me, your first reaction will be to associate fine-tuning with fine-structure. However, the two terms have nothing in common, except for four letters. 🙂 OK. Well… I am exaggerating here. The two terms are actually related, to some extent at least, but let me explain how.

The term fine-*tuning* refers to the fact that all the parameters or constants in the so-called Standard Model of physics are, indeed, all related to each other in the way they are. We can’t sort of just turn the knob of one and change it, because everything falls apart then. So, in essence, the fine-tuning problem in physics is more like a philosophical question: why is the value of all these physical constants and parameters *exactly* what it is? So it’s like asking: could we change some of the ‘constants’ and still end up with the world we’re living in? Or, if it would be some different world, how would it look like? What if *c *was some other number? What if k_{e} or ε_{0} was some other number? In short, and in light of those expressions for α, we may rephrase the question as: why is α what is is?

Of course, that’s a question one shouldn’t try to answer before answering some other, more fundamental, question: **how many degrees of freedom are there really? **Indeed, we just saw that k

_{e}and ε

_{0 }are intimately related through some equation, and other constants and parameters are related too. So the question is like: what are the ‘dependent’ and the ‘independent’ variables in this so-called Standard Model?

There is no easy answer to that question. In fact, one of the reasons why I find physics so fascinating is that one cannot easily answer such questions. There are the obvious relationships, of course. For example, the k_{e} = 1/4πε_{0 }relationship, and the context in which they are used (Coulomb’s Law) does, indeed, strongly suggest that both constants are actually part and parcel of the same thing. Identical, I’d say. Likewise, the μ_{0}ε_{0} = 1/*c*^{2 }relation also suggests there’s only one degree of freedom here, just like there’s only one degree of freedom in that ω/k = *c *relationship (if we set a value for ω, we have k, and vice versa). But… Well… I am not quite sure how to phrase this, but… *What physical constants could be ‘variables’ indeed?*

It’s pretty obvious that the various formulas for α can*not* answer that question: you could stare at them for days and weeks and months and years really, but I’d suggest you use your time to read more of Feynman’s *real* Lectures instead. 🙂 One point that may help to come to terms with this question – to some extent, at least – is what I casually mentioned above already: the fine-structure constant is equal to the square of the electron charge *expressed in Planck units*: α = e_{P}^{2}.

Now, that’s *very *remarkable because Planck units are some kind of ‘natural units’ indeed (for the detail, see my previous post: among other things, it explains what these Planck units really are) and, therefore, it is quite tempting to think that we’ve actually got only *one *degree of freedom here: α itself. All the rest ** should** follow from it.

[…]

It ** should**… But…

**it?**

*Does*The answer is: yes and no. To be frank, it’s more no than yes because, as I noted a couple of times already, the fine-structure constant *relates* a lot of stuff but it’s surely *not* the *only* significant number in the Universe. For starters, I said that our E(A to B) formula has two ‘variables’:

- We have that complex number
, which, as mentioned, is equal to the electron charge*j**expressed in Planck units*. [In case you wonder why –e≈ –0.08542455 is said to be an_{P}*amplitude*, i.e. a*complex*number or an ‘arrow’… Well… Complex numbers*include*the real numbers and, hence, –0.08542455 is both real and complex. When combining ‘arrows’ or, to be precise, when*multiplying*some complex number with –0.08542455, we will (a) shrink the original arrow to about 8.5% of its original value (8.542455% to be precise) and (b)*rotate*it over an angle of plus or minus 180 degrees. In other words, we’ll reverse its direction. Hence, using Euler’s notation for complex numbers, we can write: –1 =*e*^{iπ }=*e*^{–iπ}and, hence, –0.085 = 0.085·*e*^{iπ }= 0.085·*e*^{–iπ}. So, in short, yes,is a complex number, or an ‘arrow’, if you prefer that term.]*j* - We also have some
*some real number*in the E(A to B) formula.*n*Well… Believe it or not, it’s the electron*So what’s the n?**mass*! Isn’t that amazing?

You’ll say: *“Well… Hmm… I suppose so.” *But then you may – and actually should – also wonder: the electron mass? In what units? Planck units again? And are we talking relativistic mass (i.e. its total mass, including the equivalent mass of its kinetic energy) or its rest mass only? And we were talking α here, so can we relate it to α too, just like the electron charge?

These are all *very* good questions. Let’s start with the second one. We’re talking rather slow-moving electrons here, so the relativistic mass (m) and its rest mass (m_{0}) is more or less the same. Indeed, the Lorentz factor γ in the m = γm_{0} equation is *very *close to 1 for electrons moving at their typical speed. So… Well… That question doesn’t matter very much. *Really? *Yes. OK. Because you’re doubting, I’ll quickly show it to you. What is their ‘typical’ speed?

We know we shouldn’t attach too much importance to the concept of an electron in orbit around some nucleus (we know it’s *not* like some planet orbiting around some star) and, hence, to the concept of speed or velocity (velocity is speed with direction) when discussing an electron in an atom. The concept of *momentum *(i.e. velocity combined with mass or energy) is much more relevant. There’s a very easy mathematical relationship that gives us some clue here: the Uncertainty Principle. In fact, we’ll use the Uncertainty Principle to relate the momentum of an electron (p) to the so-called Bohr radius r (think of it as the size of a hydrogen atom) as follows: p ≈ ħ/r. [I’ll come back on this in a moment, and show you why this makes sense.]

Now we also know its kinetic energy (K.E.) is m*v*^{2}/2, which we can write as p^{2}/2m. Substituting our p ≈ ħ/r conjecture, we get K.E. = m*v*^{2}/2 = ħ^{2}/2mr^{2}. This is equivalent to m^{2}*v*^{2} = ħ^{2}/r^{2 }(just multiply both sides with m). From that, we get *v* = ħ/mr. Now, one of the many relations we can derive from the formulas for the fine-structure constant is r_{e} = α^{2}r. [I haven’t showed you that yet, but I will shortly. It’s a really amazing expression. However, as for now, just accept it as a simple formula for interim use in this digression.] Hence, r = r_{e}/α^{2}. The r_{e }factor in this expression is the so-called classical electron radius. So we can now write *v* = ħα^{2}/mr_{e}. Let’s now throw *c* in: *v*/*c *= α^{2}ħ/m*c*r_{e}. However, from that fifth expression for α, we know that ħ/m*c*r_{e} = α, so we get *v*/*c *= α. **We have another amazing result here: the v/c ratio for an electron** (i.e. its speed expressed as a fraction of the speed of light)

**is equal to that fine-structure constant α**. So that’s about 1/137, so that’s

*less*than 1% of the speed of light. Now… I’ll leave it to you to calculate the Lorentz factor γ but… Well… It’s obvious that it will be

*very*close to 1. 🙂 Hence, the electron’s speed – however we want to visualize that – doesn’t matter much indeed, so we should not worry about relativistic corrections in the formulas.

Let’s now look at the question in regard to the Planck units. If you know nothing at all about them, I would advise you to read what I wrote about them in my previous post. Let me just note we get those Planck units by equating not less than *five* fundamental physical constants to 1, notably (1) the speed of light, (2) Planck’s (reduced) constant, (3) Boltzmann’s constant, (4) Coulomb’s constant and (5) Newton’s constant (i.e. the gravitational constant). Hence, we have a set of five equations here (*c *= *ħ *= *k*_{B} = *k*_{e} = G = 1), and so we can solve that to get the five Planck units, i.e. the Planck length unit, the Planck time unit, the Planck mass unit, the Planck energy unit, the Planck charge unit and, finally (oft forgotten), the Planck temperature unit. Of course, you should note that all mass and energy units are *directly *related because of the mass-energy equivalence relation E = m*c*^{2}, which simplifies to E = m if *c* is equated to 1. [I could also say something about the relation between temperature and (kinetic) energy, but I won’t, as it would only further confuse you.]

Now, you may or may not remember that the Planck time and length units are unimaginably small, but that the Planck *mass* unit is actually quite sizable—at the atomic scale, that is. Indeed, the Planck mass is something *huge*, like the mass of an eyebrow hair, or a flea egg. Is that *huge? *Yes. Because if you’d want to pack it in a Planck-sized particle, it would make for a tiny black hole. 🙂 No kidding. That’s the physical significance of the Planck mass and the Planck length and, yes, it’s weird. 🙂

Let me give you some values. First, the Planck mass itself: it’s about 2.1765×10^{−8 }kg. Again, if you think that’s tiny, think again. From the E = mc^{2} equivalence relationship, we get that this is equivalent to 2 giga-joule, approximately. Just to give an idea, that’s like the monthly electricity consumption of an average American family. So that’s *huge* indeed! 🙂** **[Many people think that nuclear energy involves the conversion of mass into energy, but the story is actually more complicated than that. In any case… I need to move on.]

Let me now give you the electron mass expressed in the Planck mass unit:

- Measured in our old-fashioned super-sized SI
*kilogram*unit, the electron mass is m_{e}= 9.1×10^{–31 }kg. - The Planck mass is m
_{P}= 2.1765×10^{−8 }kg. - Hence, the electron mass expressed in Planck units is m
_{eP}= m_{e}/m_{P}= (9.1×10^{–31 }kg)/(2.1765×10^{−8 }kg) = 4.181×10^{−23}.

We can, once again, write that as some function of the fine-structure constant. More specifically, we can write:

m_{eP} = α/r_{eP} = α/α^{2}r_{P} = 1/αr_{P}

So… Well… Yes: **yet another amazing formula involving α. **

In this formula, we have r_{eP} and r_{P}, which are the (classical) electron radius and the Bohr radius expressed in Planck (length) units respectively. So you can see what’s going on here: *we have all kinds of numbers here expressed in Planck units*: a charge, a radius, a mass,… *And we can relate all of them to the fine-structure constant. *

Why? Who knows? I don’t. As Leighton puts it: that’s just the way “God pushed His pencil.” 🙂

Note that the beauty of natural units ensures that we get the same number for the (equivalent) energy of an electron. Indeed, from the E = m*c*^{2} relation, we know the *mass* of an electron can also be written as 0.511 MeV/*c*^{2}. Hence, the equivalent *energy* is 0.511 MeV (so that’s, quite simply, the same number but without the 1/*c*^{2 }factor). Now, the Planck energy E_{P} (in eV) is 1.22×10^{28 }eV, so we get E_{eP} = E_{e}/E_{P}_{ }= (0.511×10^{6 }eV)/(1.22×10^{28 }eV) = 4.181×10^{−23}. So it’s exactly the same as the electron *mass *expressed in Planck units. Isn’t that *nice*? 🙂

Now, are all these numbers *dimensionless*, just like α? The answer to that question is complicated. Yes, and… Well… No:

- Yes. They’re dimensionless because they measure something in natural units, i.e. Planck units, and, hence, that’s some kind of
*relative*measure indeed so… Well… Yes, dimensionless. - No. They’re not dimensionless because they do measure
*something*, like a charge, a length, or a mass, and when you chose some kind of*relative*measure, you still need to define some*gauge*, i.e. some kind of*standard measure*. So there’s some ‘dimension’ involved there.

So what’s the final answer? Well… The Planck units are *not* dimensionless. All we can say is that they are closely related, physically. I should also add that **we’ll use the electron charge and mass (expressed in Planck units) in our amplitude calculations as a simple (dimensionless) number between zero and one.** So the correct answer to the question as to whether these numbers have any dimension is: expressing *some *quantities in Planck units sort of *normalizes *them, so we can use them directly in dimensionless calculations, like when we multiply and add amplitudes.

*Hmm… *Well… I can imagine you’re not very happy with this answer but it’s the best I can do. Sorry. I’ll let *you* further ponder that question. I need to move on. * *

Note that that 4.181×10^{−23} is still a very small number (23 zeroes after the decimal point!), even if it’s like 46 million times *larger* than the electron mass measured in our conventional SI unit (i.e. 9.1×10^{–31 }kg). Does such small number make any sense? The answer is: yes, it does. When we’ll finally start discussing that E(A to B) formula (I’ll give it to you in a moment), you’ll see that a very small number for n makes a *lot* of sense.

Before diving into it all, let’s first see if that formula for that alpha, that fine-structure constant, still makes sense with m_{e} expressed in Planck units. Just to make sure. 🙂 To do that, we need to use the fifth (last) expression for a, i.e. the one with r_{e} in it. Now, in my previous post, I also gave some formula for r_{e}: r_{e} = e^{2}/4πε_{0}m_{e}c^{2}, which we can re-write as r_{e}m_{e} = e^{2}/4πε_{0}c^{2}. If we substitute that expression for r_{e}m_{e} in the formula for α, we can calculate α from the electron charge, which indicates both the electron radius and its mass are not some random God-given variable, or “some magic number *that comes to us with no understanding by man*“, as Feynman – well… Leighton, I guess – puts it. No. They are magic numbers alright, one related to another through the equally ‘magic’ number α, but so I *do* feel we actually *can* create some understanding here.

At this point, I’ll digress once again, and insert some quick back-of-the-envelope argument from Feynman’s very serious *Caltech* Lectures on Physics, in which, as part of the introduction to quantum mechanics, he calculates the so-called Bohr radius from Planck’s constant h. Let me quickly explain: the Bohr radius is, roughly speaking, the size of the simplest atom, i.e. an atom with one electron (so that’s hydrogen really). So it’s not the classical electron radius r_{e}. However, both are also related to that ‘magical number’ α. To be precise, if we write the Bohr radius as r, then r_{e} = α^{2}r ≈ 0.000053… times r, which we can re-write as:

**α = √(r _{e} /r) = (r_{e} /r)^{1/2}**

So that’s **yet another amazing formula involving the fine-structure constant**. In fact, it’s the formula I used as an ‘interim’ expression to calculate the relative speed of electrons. I just used it without any explanation there, but I am coming back to it here. Alpha again…

Just think about it for a while. In case you’d still doubt the magic of that number, let me write what we’ve discovered so far:

**(1)** α is the square of the electron charge expressed in Planck units: **α = e _{P}^{2}.**

**(2)** α is the square root of the ratio of (a) the classical electron radius and (b) the Bohr radius: **α = √(r _{e} /r)**. You’ll see this more often written as r

_{e}= α

^{2}r. Also note that this is an equation that does not depend on the units, in contrast to equation 1 (above), and 4 and 5 (below), which require you to switch to Planck units. It’s the square of a ratio and, hence, the units don’t matter. They fall away.

**(3) **α is the (relative) speed of an electron: **α = v/c**. [The relative speed is the speed as measured against the speed of light. Note that the ‘natural’ unit of speed in the Planck system of units is equal to

*c*. Indeed, if you divide one Planck length by one Planck time unit, you get (1.616×10

^{−35 }m)/(5.391×10

^{−44 }s) =

*c*m/s. However, this is another equation, just like (2), that does

*not*depend on the units: we can express

**v**and

**c**in whatever unit we want, as long we’re consistent and express both in the

*same*units.]

**(4)** Finally – I’ll show you in a moment – α is also equal to the product of (a) the electron mass (which I’ll simply write as m_{e} here) and (b) the classical electron radius r_{e} (if both are expressed in Planck units): **α = m _{e}·r_{e}**. Now

*I*think that’s, perhaps, the

*most*amazing of all of the expressions for α. If

*you*don’t think that’s amazing, I’d really suggest you stop trying to study physics. 🙂

Note that, from (2) and (4), we find that:

**(5)** The electron mass (in Planck units) is equal **m _{e} = α/r_{e }= α/α^{2}r = 1/αr.** So that gives us an expression, using α once again, for the electron mass as a function of the Bohr radius r expressed in Planck units.

Finally, we can also substitute (1) in (5) to get:

**(6) **The electron mass (in Planck units) is equal to **m _{e} = α/r_{e } = **

**e**. Using the Bohr radius, we get

_{P}^{2}/r_{e}**m**

_{e}= 1/αr = 1/**e**

_{P}^{2}r.So… As you can see, this fine-structure constant really links **ALL** of the fundamental properties of the electron: its charge, its radius, its distance to the nucleus (i.e. the Bohr radius), its velocity, its mass (and, hence, its energy),… In short,

**IT IS ALL IN ALPHA!**

Now *that* should answer the question in regard to the degrees of freedom we have here, doesn’t it? It looks like we’ve got only one degree of freedom here. Indeed, if we’ve got some value for α, then we’ve have the electron charge, and from the electron charge, we can calculate the Bohr radius r (as I will show below), and if we have r, we have m_{e }and r_{e}. And then we can also calculate ** v**, which gives us its momentum (m

*v*) and its kinetic energy (m

*v*

^{2}/2). In short,

**ALPHA GIVES US EVERYTHING!**

Isn’t that amazing? Hmm… You should reserve your judgment as for now, and carefully go over all of the formulas above and verify my statement. If you do that, you’ll probably struggle to find the Bohr radius from the charge (i.e. from α). So let me show you how you do that, because it will also show you *why *you should, indeed, reserve your judgment. In other words, I’ll show you why alpha does NOT give us everything! The argument below will, finally, prove some of the formulas that I didn’t prove above. Let’s go for it:

**1.** If we assume that (a) an electron takes some space – which I’ll denote by r 🙂 – and (b) that it has some momentum p because of its mass m and its velocity v, then the ΔxΔp = ħ relation (i.e. the Uncertainty Principle in its roughest form) suggests that the order of magnitude of r and p should be related in the very same way. Hence, let’s just boldly write r ≈ ħ/p and see what we can do with that. So we equate Δx with r and Δp with p. As Feynman notes, this is really more like a ‘dimensional analysis’ (he obviously means something very ‘rough’ with that) and so we don’t care about factors like 2 or 1/2. [Indeed, note that the more precise formulation of the Uncertainty Principle is σ_{x}σ_{p }≥ ħ/2.] In fact, we didn’t even bother to define r very rigorously. We just don’t care about precise statements at this point. We’re only concerned about orders of magnitude. [If you’re appalled by the rather rude approach, I am sorry for that, but just try to go along with it.]

**2.** From our discussions on energy, we know that the kinetic energy is m*v*^{2}/2, which we can write as p^{2}/2m so we get rid of the velocity factor. [Why? Because we can’t really imagine what it is anyway. As I said a couple of times already, we shouldn’t think of electrons as planets orbiting around some star. That model doesn’t work.] So… What’s next? Well… Substituting our p ≈ ħ/r conjecture, we get K.E. = ħ^{2}/2mr^{2}. So that’s a formula for the kinetic energy. Next is potential.

**3.** Unfortunately, the discussion on potential energy is a bit more complicated. You’ll probably remember that we had an easy and very comprehensible formula for the energy that’s needed (i.e. the work that needs to be done) to bring two charges together from a large distance (i.e. infinity). Indeed, we derived that formula directly from Coulomb’s Law (and Newton’s law of force) and it’s U = q_{1}q_{2}/4πε_{0}r_{12}. [If you think I am going too fast, sorry, please check for yourself by reading my other posts.] Now, we’re actually talking about the size of an atom here in my previous post, so one charge is the proton (+e) and the other is the electron (–e), so the potential energy is U = P.E. = –e^{2}/4πε_{0}r, with r the ‘distance’ between the proton and the electron—so that’s the Bohr radius we’re looking for!

[In case you’re struggling a bit with those minus signs when talking potential energy * *– *I am not ashamed to admit I did! *– let me quickly help you here. It has to do with our reference point: the reference point for measuring potential energy is at infinity, and it’s zero there (that’s just our convention). Now, to separate the proton and the electron, we’d have to do quite a lot of work. To use an analogy: imagine we’re somewhere deep down in a cave, and we have to climb back to the zero level. You’ll agree that’s likely to involve some sweat, don’t you? Hence, the potential energy associated with us being down in the cave is negative. Likewise, if we write the potential energy between the proton and the electron as U(r), and the potential energy at the reference point as U(∞) = 0, then the work to be done to separate the charges, i.e. the potential difference U(∞) – U(r), will be positive. So U(∞) – U(r) = 0 – U(r) > 0 and, hence, U(r) < 0. If you still don’t ‘get’ this, think of the electron being in some (potential) well, i.e. below the zero level, and so it’s potential energy is less than zero. *Huh? *Sorry. I have to move on. :-)]

**4. **We can now write the *total* energy (which I’ll denote by E, but don’t confuse it with the electric field vector!) as

E = K.E. + P.E. = ħ^{2}/2mr^{2 }– e^{2}/4πε_{0}r

Now, the electron (whatever it is) is, obviously, in some kind of equilibrium state. Why is that obvious? Well… Otherwise our hydrogen atom wouldn’t or couldn’t exist. 🙂 Hence, it’s in some kind of energy ‘well’ indeed, at the bottom. Such equilibrium point ‘at the bottom’ is characterized by its derivative (in respect to whatever variable) being equal to zero. Now, the only ‘variable’ here is r (all the other symbols are physical constants), so we have to solve for dE/dr = 0. Writing it all out yields:

dE/dr = –ħ^{2}/mr^{3 }+ e^{2}/4πε_{0}r^{2 }= 0 ⇔ r = 4πε_{0}ħ^{2}/me^{2}

You’ll say: so what? Well… We’ve got a nice formula for the Bohr radius here, and we got it in no time! 🙂 But the analysis was rough, so let’s check if it’s any good by putting the values in:

r = 4πε_{0}h^{2}/me^{2}

= [(1/(9×10^{9}) C^{2}/N·m^{2})·(1.055×10^{–34 }J·s)^{2}]/[(9.1×10^{–31 }kg)·(1.6×10^{–19 }C)^{2}]

= 53×10^{–12 }m = **53 pico-meter** (pm)

** So what?** Well… Double-check it on the Internet:

**the Bohr radius is, effectively, about 53 trillionths of a meter**indeed!

**So we’re right on the spot!**

[In case you wonder about the units, note that mass is a measure of inertia: one kg is the mass of an object which, subject to a force of 1 newton, will accelerate at the rate of 1 m/s per second. Hence, we write F = m·a, which is equivalent to m = F/a. Hence, the kg, as a unit, is equivalent to 1 N/(m/s^{2}). If you make this substitution, we get r in the unit we want to see: [(C^{2}/N·m^{2})·(N^{2}·m^{2}·s^{2})/[(N·s^{2}/m)·C^{2}] = m.]

Moreover, if we take that value for r and put it in the (total) energy formula above, we’d find that **the energy of the electron is –13.6 eV**. [Don’t forget to convert from joule to electronvolt when doing the calculation!] Now you can check that on the Internet too: 13.6 eV is exactly the amount of energy that’s needed to ionize a hydrogen atom (i.e. the energy that’s needed to kick the electron out of that energy well)!

* Waw !* Isn’t it great that such simple calculations yield such great results? 🙂 [Of course, you’ll note that the omission of the 1/2 factor in the Uncertainty Principle was quite strategic. :-)] Using the r = 4πε

_{0}ħ

^{2}/me

^{2 }formula for the Bohr radius, you can now easily check the r

_{e}= α

^{2}r formula. You should find what we jotted down already: the classical electron radius is equal to r

_{e}= e

^{2}/4πε

_{0}m

_{e}c

^{2}. To be precise, r

_{e}= (53×10

^{–6})·(53×10

^{–12}m) = 2.8×10

^{–15 }m. Now that’s again something you should check on the Internet.

**[…] It’s right on the spot again. 🙂**

*Guess what?*We can now also check that α = m·r_{e} formula: α = m·r_{e }= 4.181×10^{−23 }times… Hey! Wait! We have to express r_{e }in Planck units as well, of course! Now, (2.81794×10^{–15 }m)/(1.616×10^{–35 }m) ≈ 1.7438 ×10^{20}. So now we get 4.181×10^{−23 }times 1.7438×10^{20 }= 7.29×10^{–3 }= 0.00729 ≈ 1/137. * Bingo! *We got the magic number once again. 🙂

So… Well… Doesn’t that confirm we actually *do* have it all with α?

Well… Yes and no… First, you should note that I had to use *h* in that calculation of the Bohr radius. Moreover, the other physical constants (most notably *c* and the Coulomb constant) were actually there as well, ‘in the background’ so to speak, because one needs them to derive the formulas we used above. And then we have the equations themselves, of course, most notably that Uncertainty Principle… So… Well…

**It’s not like God gave us one number only (α) and that all the rest flows out of it. We have a whole bunch of ‘fundamental’ relations and ‘fundamental’ constants here.**

Having said that, it’s true that statement still does not diminish the magic of alpha.

Hmm… Now you’ll wonder: how many? How many constants do we need in all of physics?

Well… I’d say, you should not only ask about the constants: you should also ask about the equations: *how many equations do we need in all of physics? *[Just for the record, I had to smile when the Hawking of the movie says that he’s actually looking for *one formula that sums up all of physics. *Frankly, that’s a nonsensical statement. Hence, I think the real Hawking never said anything like that. Or, if he did, that it was one of those statements one needs to interpret *very *carefully.]

But let’s look at a few constants indeed. For example, if we have *c*, *h* and α, then we can calculate the electric charge e and, hence, the electric constant ε_{0 }= e^{2}/2α*h**c*. From that, we get Coulomb’s constant k_{e}, because k_{e} is defined as 1/4πε_{0}… But…

* Hey! Wait a minute! How do we know that k_{e} = 1/4πε_{0}?* Well… From experiment.

*But…*Yes?

*That means 1/4π is some fundamental proportionality coefficient too, isn’t it?*

Wow! You’re smart. That’s a good and valid remark. In fact, we use the so-called *reduced* Planck constant *ħ* in a number of calculations, and so that involves a 2π factor too (*ħ *= *h*/2π). Hence… Well… Yes, perhaps we should consider 2π as some fundamental constant too! And, then, well… Now that I think of it, there’s a few other mathematical constants out there, like *Euler’s number **e*, for example, which we use in complex exponentials.

**?!?**

*I am joking, right? *I am *not* saying that 2π and Euler’s number are fundamental ‘physical’ constants, am I? [Note that it’s a bit of a nuisance we’re also using the *e *symbol for Euler’s number, but so we’re not talking the electron charge here: we’re talking that 2.71828…etc number that’s used in so-called ‘natural’ exponentials and logarithms.]

Well… Yes and no. They’re *mathematical *constants indeed, rather than physical, but… Well… I hope you get my point. What I want to show here, is that it’s quite hard to say what’s fundamental and what isn’t. We can actually pick and choose a bit among all those constants and all those equations. As one physicist puts its: * it depends on how we slice it*. The one thing we know for sure is that a great many things are related, in a

*physical*way (α connects all of the fundamental properties of the electron, for example) and/or in a

*mathematical*way (2π connects not only the circumference of the unit circle with the radius but quite a few other constants as well!), but… Well… What to say? It’s a tough discussion and I am not smart enough to give you an unambiguous answer. From what I gather on the Internet, when looking at the

*whole*Standard Model (including the strong force, the weak force and the Higgs field), we’ve got a few dozen physical ‘fundamental’ constants, and then a few mathematical ones as well.

That’s a lot, you’ll say. Yes. At the same time, it’s *not *an* awful *lot*. *Whatever number it is, it does raise a very fundamental question: why are they what they are? That brings us back to that ‘fine-tuning’ problem. Now, I can’t make this post too long (it’s way too long already), so let me just conclude this discussion by copying Wikipedia on that question, because what it has on this topic is not so bad:

“Some physicists have explored the notion that if the physical constants had sufficiently different values, our Universe would be so radically different that intelligent life would probably not have emerged, and that our Universe therefore seems to be fine-tuned for intelligent life. The anthropic principle states a logical truism: **the fact of our existence as intelligent beings who can measure physical constants requires those constants to be such that beings like us can exist.**“

I like this. But the article then adds the following, which I do *not* like so much, because I think it’s a bit too ‘frivolous’:

“There are a variety of interpretations of the constants’ values, including that of a divine creator (the apparent fine-tuning is actual and intentional), or that ours is one universe of many in a *multiverse *(e.g. the many-worlds interpretation of quantum mechanics), or even that, if information is an innate property of the universe and logically inseparable from consciousness, a universe without the capacity for conscious beings cannot exist.”

Hmm… As said, I am quite happy with the logical truism: we are there because alpha (and a whole range of other stuff) is what it is, and we can *measure* alpha (and a whole range of other stuff) as what it is, because… Well… Because we’re here. Full stop. As for the ‘interpretations’, I’ll let you think about that for yourself. 🙂

I need to get back to the lesson. Indeed, this was just a ‘digression’. My post was about the three fundamental events or actions in quantum electrodynamics, and so I was talking about that E(A to B) formula. However, I had to do that digression on alpha to ensure you understand what I want to write about that. So let me now get back to it. End of digression. 🙂

**The E(A to B) formula**

Indeed, I must assume that, with all these digressions, you are truly despairing now. *Don’t.* We’re there! We’re finally ready for the E(A to B) formula! Let’s go for it.

We’ve now got those two numbers measuring the electron charge and the electron mass *in Planck units* respectively. They’re fundamental indeed and so let’s loosen up on notation and just write them as e and m respectively. Let me recap:

**1.** The value of e is approximately –0.08542455, and it corresponds to the so-called junction number ** j**, which is the amplitude for an electron-photon coupling. When multiplying it with another amplitude (to find the amplitude for an event consisting of two sub-events, for example), it corresponds to a ‘shrink’ to less than one-tenth (something like 8.5% indeed, corresponding to the magnitude of e) and a ‘rotation’ (or a ‘turn’) over 180 degrees, as mentioned above.

Please note what’s going on here: we have a physical quantity, the electron charge (expressed in Planck units), and we use it in a quantum-mechanical calculation as a dimensionless (complex) number, i.e. as an amplitude. So… Well… That’s what physicists mean when they say that **the charge of some particle** (usually the electric charge but, in quantum chromodynamics, it will be the ‘color’ charge of a quark) **is a ‘coupling constant’**.

**2.** We also have m, the electron mass, and we’ll use in the same way, i.e. as some dimensionless amplitude. As compared to ** j**, it’s is a

*very*tiny number: approximately 4.181×10

^{−23}. So if you look at it as an amplitude, indeed, then it corresponds to an enormous ‘shrink’ (but no turn) of the amplitude(s) that we’ll be combining it with.

So… Well… How do we do it?

Well… At this point, Leighton goes a bit off-track. Just a little bit. 🙂 From what he writes, it’s obvious that he assumes the frequency (or, what amounts to the same, the de Broglie wavelength) of an electron is just like the frequency of a photon. Frankly, I just can’t imagine why and how Feynman let this happen. *It’s wrong. Plain wrong.* As I mentioned in my introduction already, an electron traveling through space is *not* like a photon traveling through space.

For starters, an electron is much slower (because it’s a matter-particle: hence, it’s got mass). Secondly, the *de Broglie* wavelength and/or frequency of an electron is not like that of a photon. For example, if we take an electron and a photon having the same energy, let’s say 1 eV (that corresponds to infrared light), then the de Broglie wavelength of the electron will be 1.23 *nano*-meter (i.e. 1.23 *billionths* of a meter). Now that’s about one thousand times smaller than the wavelength of our 1 eV photon, which is about 1240 nm. You’ll say: how is that possible? If they have the same energy, then the f = E/*h* and ν = E/*h* should give the same frequency and, hence, the same wavelength, no?

Well… No! *Not at all!* Because an electron, unlike the photon, has a rest mass indeed – measured as not less than 0.511 MeV/*c*^{2}, to be precise (note the rather particular MeV/*c*^{2 }unit: it’s from the E = m*c*^{2 }formula) – one should use a different energy value! Indeed, we should include the rest mass *energy*, which is 0.511 MeV. So, almost all of the energy here is rest mass energy! There’s also another complication. For the photon, there is an easy relationship between the wavelength and the frequency: it has no mass and, hence, all its energy is kinetic, or movement so to say, and so we can use that ν = E/*h* relationship to calculate its frequency ν: it’s equal to ν = E/*h* = (1 eV)/(4.13567×10^{–15 }eV·s) ≈ 0.242×10^{15 }Hz = 242 *tera*-hertz (1 THz = 10^{12 }oscillations per second). Now, knowing that light travels at the speed of light, we can check the result by calculating the wavelength using the λ = *c*/ν relation. Let’s do it: (2.998×10^{8 }m/s)/(242×10^{12 }Hz) ≈ 1240 nm. So… Yes, done!

But so we’re talking photons here. For the electron, the story is much more complicated. That wavelength I mentioned was calculated using the other of the two *de Broglie* relations: λ = *h*/p. So that uses the *momentum *of the electron which, as you know, is the product of its mass (m) and its velocity (*v*): p = m*v*. You can amuse yourself and check if you find the same wavelength (1.23 nm): you should! From the *other* de Broglie relation, f = E/h, you can also calculate its frequency: for an electron moving at non-relativistic speeds, it’s about 0.123×10^{21 }Hz, so that’s like 500,000 times the frequency of the photon we we’re looking at! When multiplying the frequency and the wavelength, we should get its speed. However, that’s where we get in trouble. Here’s the problem with matter waves: they have a so-called group velocity and a so-called phase velocity. The idea is illustrated below: the green dot travels with the wave packet – and, hence, its velocity corresponds to the group velocity – while the red dot travels with the oscillation itself, and so that’s the phase velocity. [You should also remember, of course, that the matter wave is some complex-valued wavefunction, so we have both a real as well as an imaginary part oscillating and traveling through space.]

To be precise, the phase velocity will be superluminal. Indeed, using the usual relativistic formula, we can write that p = γm_{0}*v* and E = γm_{0}*c*^{2}, with *v* the (classical) velocity of the electron and *c *what it always is, i.e. the speed of light. Hence, λ = *h*/γm_{0}*v* and *f *= γm_{0}*c*^{2}/*h*, and so λ*f* = *c*^{2}/*v*. Because *v* is (much) smaller than c, we get a superluminal velocity. However, that’s the phase velocity indeed, not the group velocity, which corresponds to *v*. OK… I need to end this digression.

So what? Well, to make a long story short, the ‘amplitude framework’ for electrons is differerent. Hence, the story that I’ll be telling here is different from what you’ll read in Feynman’s QED. I will use his drawings, though, and his concepts. Indeed, despite my misgivings above, the conceptual framework is sound, and so the corrections to be made are relatively minor.

So… We’re looking at E(A to B), i.e. the amplitude for an electron to go from point A to B in spacetime, and I said the conceptual framework is exactly the same as that for a photon. Hence, the electron can follow any path really. It *may* go in a straight line and travel at a speed that’s consistent with what we know of its momentum (p), but it may also follow other paths. So, just like the photon, we’ll have some so-called *propagator* function, which gives you amplitudes based on the distance in space as well as in the distance in ‘time’ between two points. Now, Ralph Leighton identifies that propagator function with the propagator function for the photon, i.e. P(A to B), but that’s wrong: it’s *not* the same.

The propagator function for an electron depends on its mass and its velocity, and/or on the combination of both (like it momentum p = m*v* and/or its *kinetic *energy: K.E. = m*v*^{2} = p^{2}/2m). So we have a *different* propagator function here. However, I’ll use the same symbol for it: P(A to B).

So, the bottom line is that, because of the electron’s mass (which, remember, is a measure for inertia), momentum and/or kinetic energy (which, remember, are *conserved *in physics), **the straight line is definitely the most likely path**,

*but*(

**), just like the photon, the electron may follow some other path as well.**

*big but!*So how do we formalize that? Let’s first associate an amplitude P(A to B) with an electron traveling from point A to B in a straight line and in a time that’s consistent with its velocity. Now, as mentioned above, the P here stands for **p**ropagator function, not for photon, so we’re talking a different P(A to B) here than that P(A to B) function we used for the photon. Sorry for the confusion. 🙂 The left-hand diagram below then shows what we’re talking about: it’s the so-called ‘one-hop flight’, and so that’s what the P(A to B) amplitude is associated with.

Now, the electron can follow other paths. For photons, we said the amplitude depended on the spacetime interval I: when negative or positive (i.e. paths that are not associated with the photon traveling in a straight line and/or at the speed of light), the contribution of those paths to the final amplitudes (or ‘final arrow’, as it was called) was smaller.

For an electron, we have something similar, but it’s modeled differently. We say the electron could take a ‘two-hop flight’ (via point C or C’), or a ‘three-hop flight’ (via D and E) from point A to B. Now, it makes sense that these paths should be associated with amplitudes that are *much* smaller. Now that’s where that *n*-factor comes in. We just put some real number n in the formula for the amplitude for an electron to go from A to B via C, which we write as:

P(A to C)∗n^{2}∗P(C to B)

Note what’s going on here. We multiply two amplitudes, P(A to C) and P(C to B), which is OK, because that’s what the rules of quantum mechanics tell us: if an ‘event’ consists of two sub-events, we need to multiply the amplitudes (not the probabilities) in order to get the amplitude that’s associated with both sub-events happening. However, we add an extra factor: n^{2}. Note that it must be some very small number because we have lots of alternative paths and, hence, they should *not* be very likely! So what’s the n? And why n^{2} instead of just n?

Well… Frankly, I don’t know. Ralph Leighton boldly equates n to the mass of the electron. Now, because he obviously means the mass *expressed in Planck units*, that’s the same as saying n is the electron’s energy (again, expressed in Planck’s ‘natural’ units), so n should be that number m = m_{eP} = E_{eP} = 4.181×10^{−23}. However, I couldn’t find any confirmation on the Internet, or elsewhere, of the suggested n = m identity, so I’ll assume n = m indeed, but… Well… Please check for yourself. It seems the answer is to be found in a mathematical theory that helps physicists to actually calculate ** j** and n from experiment. It’s referred to as

*perturbation theory*, and it’s the next thing on my study list. As for now, however, I can’t help you much. I can only note that the equation makes sense.

*Of course*, it does: inserting a tiny little number n, close to zero, ensures that those other amplitudes don’t contribute too much to the final ‘arrow’. And it also makes a lot of sense to associate it with the electron’s mass: if mass is a measure of inertia, then it should be some factor reducing the amplitude that’s associated with the electron following such crooked path. So let’s go along with it, and see what comes out of it.

A three-hop flight is even weirder and uses that n^{2} factor two times:

P(A to E)∗n^{2}∗P(E to D)∗n^{2}∗P(D to B)

So we have an (n^{2})^{2 }= n^{4 }factor here, which is good, because two hops should be much less likely than one hop. So what do we get? Well… (4.181×10^{−23})^{4 }≈ 305×10^{−92}. Pretty tiny, *huh*? 🙂 Of course, any point in space is a potential hop for the electron’s flight from point A to B and, hence, there’s a lot of paths and a lot of amplitudes (or ‘arrows’ if you want), which, again, is consistent with a very tiny value for n indeed.

So, to make a long story short, E(A to B) will be a giant sum (i.e. some kind of integral indeed) of a lot of different ways an electron can go from point A to B. It will be a series of terms P(A to E) + P(A to C)∗n^{2}∗P(C to B) + P(A to E)∗n^{2}∗P(E to D)∗n^{2}∗P(D to B) + … for all possible intermediate points C, D, E, and so on.

What about the ** j**? The junction number of coupling constant. How does that show up in the E(A to B) formula? Well… Those alternative paths with hops here and there are actually the easiest bit of the whole calculation. Apart from taking some strange path,

*electrons can also emit and/or absorb photons d*In fact, they’re doing that constantly actually. Indeed, the image of an electron ‘in orbit’ around the nucleus is that of an electron exchanging so-called ‘virtual’ photons constantly, as illustrated below. So our image of an electron absorbing and then emitting a photon (see the diagram on the right-hand side) is really like the tiny tip of a giant iceberg: most of what’s going on is underneath! So that’s where our junction number

*uring the trip*.**comes in, i.e. the charge (e) of the electron.**

*j*So, when you hear that a coupling constant is actually equal to the charge, then this is what it means: you should just note it’s the charge *expressed in Planck units*. But it’s a deep connection, isn’t? When everything is said and done, a charge is something *physical*, but so here, in these amplitude calculations, it just shows up as some dimensionless negative number, used in multiplications and additions of amplitudes. Isn’t that remarkable?

The situation becomes even more complicated when more than one electron is involved. For example, two electrons can go in a straight line from point 1 and 2 to point 3 and 4 respectively, but there’s two ways in which this can happen, and they might exchange photons along the way, as shown below. If there’s two *alternative *ways in which one event can happen, you know we have to add amplitudes, rather than multiply them. Hence, the formula for E(A to B) becomes even more complicated.

Moreover, a *single* electron may first emit and then absorb a photon itself, so there’s no need for other particles to be there to have lots of ** j** factors in our calculation. In addition, that photon may briefly disintegrate into an electron and a positron, which then annihilate each other to again produce a photon: in case you wondered, that’s what those little loops in those diagrams depicting the exchange of virtual photons is supposed to represent. So, every single junction (i.e. every emission and/or absorption of a photon) involves a multiplication with that junction number

**, so if there are two couplings involved, we have a**

*j*

*j*^{2}factor, and so that’s 0.08542455

^{2}= α ≈ 0.0073. Four couplings implies a factor of 0.08542455

^{4}≈ 0.000053.

Just as an example, I copy two diagrams involving four, five or six couplings indeed. They all have some ‘incoming’ photon, because Feynman uses them to explain something else (the so-called magnetic moment of a photon), but it doesn’t matter: the same illustrations can serve multiple purposes.

Now, it’s obvious that the contributions of the alternatives with many couplings add *almost* nothing to the final amplitude – just like the ‘many-hop’ flights add *almost* nothing – but… Well… As tiny as these contributions are, they are all *there*, and so they all have to be accounted for. So… Yes. You can easily appreciate how messy it all gets, especially in light of the fact that there are so many points that can serve as a ‘hop’ or a ‘coupling’ point!

So… Well… Nothing. That’s it! I am done! I realize this has been another long and difficult story, but I hope you appreciated and that it shed some light on what’s really behind those simplified stories of what quantum mechanics is all about. It’s all weird and, admittedly, not so easy to understand, but I wouldn’t say an understanding is really beyond the reach of us, common mortals. 🙂

**Post scriptum**: When you’ve reached here, you may wonder: so where’s the final formula then for E(A to B)? Well… I have no easy formula for you. From what I wrote above, it should be obvious that we’re talking some really awful-looking integral and, because it’s so awful, I’ll let you find it yourself. 🙂

I should also note another reason why I am reluctant to identify n with m. The formulas in Feynman’s QED are definitely *not *the standard ones. The more standard formulations will use the *gauge coupling parameter *about which I talked already. I sort of discussed it, indirectly, in my first comments on Feynman’s QED, when I criticized some other part of the book, notably its explanation of the phenomenon of diffraction of light, which basically boiled down to: “When you try to squeeze light too much [by forcing it to go through a small hole], it refuses to cooperate and begins to spread out”, because “there are not enough arrows representing alternative paths.”

Now *that *raises a lot of questions, and very sensible ones, because that simplification is nonsensical. *Not enough arrows?* That statement doesn’t make sense. We can subdivide space in as many paths as we want, and probability amplitudes don’t take up any physical space. We can cut up space in smaller and smaller pieces (so we analyze more paths within the same space). The consequence – in terms of arrows – is that *directions* of our arrows won’t change but their length will be much and much smaller as we’re analyzing many more paths. That’s because of the normalization constraint. However, when adding them all up – a lot of very tiny ones, or a smaller bunch of bigger ones – we’ll still get the same ‘final’ arrow. That’s because the direction of those arrows depends on the *length *of the path, and the length of the path doesn’t change simply because we suddenly decide to use some other ‘gauge’.

Indeed, the real question is: what’s a ‘small’ hole? What’s ‘small’ and what’s ‘large’ in quantum electrodynamics? Now, I gave an intuitive answer to that question in that post of mine, but it’s much more accurate than Feynman’s, or Leighton’s. The answer to that question is: there’s some kind of natural ‘gauge’, and it’s related to the wavelength. So the wavelength of a photon, or an electron, in this case, comes with some kind of scale indeed. That’s why the fine-structure constant is often written in yet another form:

α = 2πr_{e}/λ_{e }= r_{e}k_{e }

λ_{e }and k_{e }are the Compton wavelength and wavenumber of the electron (so k_{e }is *not *the Coulomb constant here). The Compton wavelength is the *de Broglie *wavelength of the electron. [You’ll find that Wikipedia defines it as “the wavelength that’s equivalent to the wavelength of a photon whose energy is the same as the rest-mass energy of the electron”, but that’s a very confusing definition, I think.]

The point to note is that the *spatial *dimension in both the analysis of photons as well as of matter waves, especially in regard to studying diffraction and/or interference phenomena, is related to the frequencies, wavelengths and/or wavenumbers of the wavefunctions involved. There’s a certain ‘gauge’ involved indeed, i.e. *some measure that is relative*, like the

*gauge*pressure illustrated below. So that’s where that

*gauge*

*parameter*g comes in. And the fact that it’s yet another number that’s closely related to that fine-structure constant is… Well… Again… That alpha number is a very magic number indeed… 🙂

**Post scriptum** (5 October 2015):

Much stuff is physics is quite ‘magical’, but it’s never ‘too magical’. I mean: there’s always an explanation. So there is a very logical explanation for the above-mentioned deep connection between the charge of an electron, its energy and/or mass, its various radii (or physical dimensions) and the coupling constant too. I wrote a piece about that, much later than when I wrote the piece above. I would recommend you read that piece too. It’s a piece in which I do take the magic out of ‘God’s number’. Understanding it involves a deep understanding of electromagnetism, however, and that requires some effort. It’s surely worth the effort, though.