The Imaginary Energy Space

Post scriptum note added on 11 July 2016: This is one of the more speculative posts which led to my e-publication analyzing the wavefunction as an energy propagation. With the benefit of hindsight, I would recommend you to immediately the more recent exposé on the matter that is being presented here, which you can find by clicking on the provided link. In addition, I see the dark force has amused himself by removing some material even here!

Original post:

Intriguing title, isn’t it? You’ll think this is going to be highly speculative and you’re right. In fact, I could also have written: the imaginary action space, or the imaginary momentum space. Whatever. It all works ! It’s an imaginary space – but a very real one, because it holds energy, or momentum, or a combination of both, i.e. action. 🙂

So the title is either going to deter you or, else, encourage you to read on. I hope it’s the latter. 🙂

In my post on Richard Feynman’s exposé on how Schrödinger got his famous wave equation, I noted an ambiguity in how he deals with the energy concept. I wrote that piece in February, and we are now May. In-between, I looked at Schrödinger’s equation from various perspectives, as evidenced from the many posts that followed that February post, which I summarized on my Deep Blue page, where I note the following:

  1. The argument of the wavefunction (i.e. θ = ωt – kx = [E·t – p·x]/ħ) is just the proper time of the object that’s being represented by the wavefunction (which, in most cases, is an elementary particle—an electron, for example).
  2. The 1/2 factor in Schrödinger’s equation (∂ψ/∂t = i·(ħ/2m)·∇2ψ) doesn’t make all that much sense, so we should just drop it. Writing ∂ψ/∂t = i·(m/ħ)∇2ψ (i.e. Schrödinger’s equation without the 1/2 factor) does away with the mentioned ambiguities and, more importantly, avoids obvious contradictions.

Both remarks are rather unusual—especially the second one. In fact, if you’re not shocked by what I wrote above (Schrödinger got something wrong!), then stop reading—because then you’re likely not to understand a thing of what follows. 🙂 In any case, I thought it would be good to follow up by devoting a separate post to this matter.

The argument of the wavefunction as the proper time

Frankly, it took me quite a while to see that the argument of the wavefunction is nothing but the t’ = (t − v∙x)/√(1−v2)] formula that we know from the Lorentz transformation of spacetime. Let me quickly give you the formulas (just substitute the for v):

relativity

In fact, let me be precise: the argument of the wavefunction also has the particle’s rest mass m0 in it. That mass factor (m0) appears in it as a general scaling factor, so it determines the density of the wavefunction both in time as well as in space. Let me jot it down:

ψ(x, t) = a·ei·(mv·t − p∙x) = a·ei·[(m0/√(1−v2))·t − (m0·v/√(1−v2))∙x] = a·ei·m0·(t − v∙x)/√(1−v2)

Huh? Yes. Let me show you how we get from θ = ωt – kx = [E·t – p·x]/ħ to θ = mv·t − p∙x. It’s really easy. We first need to choose our units such that the speed of light and Planck’s constant are numerically equal to one, so we write: = 1 and ħ = 1. So now the 1/ħ factor no longer appears.

[Let me note something here: using natural units does not do away with the dimensions: the dimensions of whatever is there remain what they are. For example, energy remains what it is, and so that’s force over distance: 1 joule = 1 newton·meter (1 J = 1 N·m. Likewise, momentum remains what it is: force times time (or mass times velocity). Finally, the dimension of the quantum of action doesn’t disappear either: it remains the product of force, distance and time (N·m·s). So you should distinguish between the numerical value of our variables and their dimension. Always! That’s where physics is different from algebra: the equations actually mean something!]

Now, because we’re working in natural units, the numerical value of both and cwill be equal to 1. It’s obvious, then, that Einstein’s mass-energy equivalence relation reduces from E = mvc2 to E = mv. You can work out the rest yourself – noting that p = mv·v and mv = m0/√(1−v2). Done! For a more intuitive explanation, I refer you to the above-mentioned page.

So that’s for the wavefunction. Let’s now look at Schrödinger’s wave equation, i.e. that differential equation of which our wavefunction is a solution. In my introduction, I bluntly said there was something wrong with it: that 1/2 factor shouldn’t be there. Why not?

What’s wrong with Schrödinger’s equation?

When deriving his famous equation, Schrödinger uses the mass concept as it appears in the classical kinetic energy formula: K.E. = m·v2/2, and that’s why – after all the complicated turns – that 1/2 factor is there. There are many reasons why that factor doesn’t make sense. Let me sum up a few.

[I] The most important reason is that de Broglie made it quite clear that the energy concept in his equations for the temporal and spatial frequency for the wavefunction – i.e. the ω = E/ħ and k = p/ħ relations – is the total energy, including rest energy (m0), kinetic energy (m·v2/2) and any potential energy (V). In fact, if we just multiply the two de Broglie (aka as matter-wave equations) and use the old-fashioned v = λ relation (so we write E as E = ω·ħ = (2π·f)·(h/2π) = f·h, and p as p = k·ħ = (2π/λ)·(h/2π) = h/λ and, therefore, we have = E/h and p = h/p), we find that the energy concept that’s implicit in the two matter-wave equations is equal to E = m∙v2, as shown below:

  1. f·λ = (E/h)·(h/p) = E/p
  2. v = λ ⇒ f·λ = v = E/p ⇔ E = v·p = v·(m·v) ⇒ E = m·v2

Huh? E = m∙v2? Yes. Not E = m∙c2 or m·v2/2 or whatever else you might be thinking of. In fact, this E = m∙v2 formula makes a lot of sense in light of the two following points.

Skeptical note: You may – and actually should – wonder whether we can use that v = λ relation for a wave like this, i.e. a wave with both a real (cos(-θ)) as well as an imaginary component (i·sin(-θ). It’s a deep question, and I’ll come back to it later. But… Yes. It’s the right question to ask. 😦

[II] Newton told us that force is mass time acceleration. Newton’s law is still valid in Einstein’s world. The only difference between Newton’s and Einstein’s world is that, since Einstein, we should treat the mass factor as a variable as well. We write: F = mv·a = mv·= [m0/√(1−v2)]·a. This formula gives us the definition of the newton as a force unit: 1 N = 1 kg·(m/s)/s = 1 kg·m/s2. [Note that the 1/√(1−v2) factor – i.e. the Lorentz factor (γ) – has no dimension, because is measured as a relative velocity here, i.e. as a fraction between 0 and 1.]

Now, you’ll agree the definition of energy as a force over some distance is valid in Einstein’s world as well. Hence, if 1 joule is 1 N·m, then 1 J is also equal to 1 (kg·m/s2)·m = 1 kg·(m2/s2), so this also reflects the E = m∙v2 concept. [I can hear you mutter: that kg factor refers to the rest mass, no? No. It doesn’t. The kg is just a measure of inertia: as a unit, it applies to both mas well as mv. Full stop.]

Very skeptical note: You will say this doesn’t prove anything – because this argument just shows the dimensional analysis for both equations (i.e. E = m∙v2 and E = m∙c2) is OK. Hmm… Yes. You’re right. 🙂 But the next point will surely convince you! 🙂

[III] The third argument is the most intricate and the most beautiful at the same time—not because it’s simple (like the arguments above) but because it gives us an interpretation of what’s going on here. It’s fairly easy to verify that Schrödinger’s equation, ∂ψ/∂t = i·(ħ/2m)·∇2ψ equation (including the 1/2 factor to which I object), is equivalent to the following set of two equations:

  1. Re(∂ψ/∂t) = −(ħ/2m)·Im(∇2ψ)
  2. Im(∂ψ/∂t) = (ħ/2m)·Re(∇2ψ)

[In case you don’t see it immediately, note that two complex numbers a + i·b and c + i·d are equal if, and only if, their real and imaginary parts are the same. However, here we have something like this: a + i·b = i·(c + i·d) = i·c + i2·d = − d + i·c (remember i= −1).]

Now, before we proceed (i.e. before I show you what’s wrong here with that 1/2 factor), let us look at the dimensions first. For that, we’d better analyze the complete Schrödinger equation so as to make sure we’re not doing anything stupid here by looking at one aspect of the equation only. The complete equation, in its original form, is:

schrodinger 5

Notice that, to simplify the analysis above, I had moved the and the ħ on the left-hand side to the right-hand side (note that 1/= −i, so −(ħ2/2m)/(i·ħ) = ħ/2m). Now, the ħfactor on the right-hand side is expressed in J2·s2. Now that doesn’t make much sense, but then that mass factor in the denominator makes everything come out alright. Indeed, we can use the mass-equivalence relation to express m in J/(m/s)2 units. So our ħ2/2m coefficient is expressed in (J2·s2)/[J/(m/s)2] = J·m2. Now we multiply that by that Laplacian operating on some scalar, which yields some quantity per square meter. So the whole right-hand side becomes some amount expressed in joule, i.e. the unit of energy! Interesting, isn’t it?

On the left-hand side, we have i and ħ. We shouldn’t worry about the imaginary unit because we can treat that as just another number, albeit a very special number (because its square is minus 1). However, in this equation, it’s like a mathematical constant and you can think of it as something like π or e. [Think of the magical formula: eiπ = i2 = −1.] In contrast, ħ is a physical constant, and so that constant comes with some dimension and, therefore, we cannot just do what we want. [I’ll show, later, that even moving it to the other side of the equation comes with interpretation problems, so be careful with physical constants, as they really mean something!] In this case, its dimension is the action dimension: J·s = N·m·s, so that’s force times distance times time. So we multiply that with a time derivative and we get joule once again (N·m·s/s = N·m = J), so that’s the unit of energy. So it works out: we have joule units both left and right in Schrödinger’s equation. Nice! Yes. But what does it mean? 🙂

Well… You know that we can – and should – think of Schrödinger’s equation as a diffusion equation – just like a heat diffusion equation, for example – but then one describing the diffusion of a probability amplitude. [In case you are not familiar with this interpretation, please do check my post on it, or my Deep Blue page.] But then we didn’t describe the mechanism in very much detail, so let me try to do that now and, in the process, finally explain the problem with the 1/2 factor.

The missing energy

There are various ways to explain the problem. One of them involves calculating group and phase velocities of the elementary wavefunction satisfying Schrödinger’s equation but that’s a more complicated approach and I’ve done that elsewhere, so just click the reference if you prefer the more complicated stuff. I find it easier to just use those two equations above:

  1. Re(∂ψ/∂t) = −(ħ/2m)·Im(∇2ψ)
  2. Im(∂ψ/∂t) = (ħ/2m)·Re(∇2ψ)

The argument is the following: if our elementary wavefunction is equal to ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt), then it’s easy to proof that this pair of conditions is fulfilled if, and only if, ω = k2·(ħ/2m). [Note that I am omitting the normalization coefficient in front of the wavefunction: you can put it back in if you want. The argument here is valid, with or without normalization coefficients.] Easy? Yes. Check it out. The time derivative on the left-hand side is equal to:

∂ψ/∂t = −iω·iei(kx − ωt) = ω·[cos(kx − ωt) + i·sin(kx − ωt)] = ω·cos(kx − ωt) + iω·sin(kx − ωt)

And the second-order derivative on the right-hand side is equal to:

2ψ = ∂2ψ/∂x= i·k2·ei(kx − ωt) = k2·cos(kx − ωt) + i·k2·sin(kx − ωt)

So the two equations above are equivalent to writing:

  1. Re(∂ψB/∂t) =   −(ħ/2m)·Im(∇2ψB) ⇔ ω·cos(kx − ωt) = k2·(ħ/2m)·cos(kx − ωt)
  2. Im(∂ψB/∂t) = (ħ/2m)·Re(∇2ψB) ⇔ ω·sin(kx − ωt) = k2·(ħ/2m)·sin(kx − ωt)

So both conditions are fulfilled if, and only if, ω = k2·(ħ/2m). You’ll say: so what? Well… We have a contradiction here—something that doesn’t make sense. Indeed, the second of the two de Broglie equations (always look at them as a pair) tells us that k = p/ħ, so we can re-write the ω = k2·(ħ/2m) condition as:

ω/k = vp = k2·(ħ/2m)/k = k·ħ/(2m) = (p/ħ)·(ħ/2m) = p/2m ⇔ p = 2m

You’ll say: so what? Well… Stop reading, I’d say. That p = 2m doesn’t make sense—at all! Nope! In fact, if you thought that the E = m·v2  is weird—which, I hope, is no longer the case by now—then… Well… This p = 2m equation is much weirder. In fact, it’s plain nonsense: this condition makes no sense whatsoever. The only way out is to remove the 1/2 factor, and to re-write the Schrödinger equation as I wrote it, i.e. with an ħ/m coefficient only, rather than an (1/2)·(ħ/m) coefficient.

Huh? Yes.

As mentioned above, I could do those group and phase velocity calculations to show you what rubbish that 1/2 factor leads to – and I’ll do that eventually – but let me first find yet another way to present the same paradox. Let’s simplify our life by choosing our units such that = ħ = 1, so we’re using so-called natural units rather than our SI units. [Again, note that switching to natural units doesn’t do anything to the physical dimensions: a force remains a force, a distance remains a distance, and so on.] Our mass-energy equivalence then becomes: E = m·c= m·1= m. [Again, note that switching to natural units doesn’t do anything to the physical dimensions: a force remains a force, a distance remains a distance, and so on. So we’d still measure energy and mass in different but equivalent units. Hence, the equality sign should not make you think mass and energy are actually the same: energy is energy (i.e. force times distance), while mass is mass (i.e. a measure of inertia). I am saying this because it’s important, and because it took me a while to make these rather subtle distinctions.]

Let’s now go one step further and imagine a hypothetical particle with zero rest mass, so m0 = 0. Hence, all its energy is kinetic and so we write: K.E. = mv·v/2. Now, because this particle has zero rest mass, the slightest acceleration will make it travel at the speed of light. In fact, we would expect it to travel at the speed, so mv = mc and, according to the mass-energy equivalence relation, its total energy is, effectively, E = mv = mc. However, we just said its total energy is kinetic energy only. Hence, its total energy must be equal to E = K.E. = mc·c/2 = mc/2. So we’ve got only half the energy we need. Where’s the other half? Where’s the missing energy? Quid est veritas? Is its energy E = mc or E = mc/2?

It’s just a paradox, of course, but one we have to solve. Of course, we may just say we trust Einstein’s E = m·c2 formula more than the kinetic energy formula, but that answer is not very scientific. 🙂 We’ve got a problem here and, in order to solve it, I’ve come to the following conclusion: just because of its sheer existence, our zero-mass particle must have some hidden energy, and that hidden energy is also equal to E = m·c2/2. Hence, the kinetic and the hidden energy add up to E = m·c2 and all is alright.

Huh? Hidden energy? I must be joking, right?

Well… No. Let me explain. Oh. And just in case you wonder why I bother to try to imagine zero-mass particles. Let me tell you: it’s the first step towards finding a wavefunction for a photon and, secondly, you’ll see it just amounts to modeling the propagation mechanism of energy itself. 🙂

The hidden energy as imaginary energy

I am tempted to refer to the missing energy as imaginary energy, because it’s linked to the imaginary part of the wavefunction. However, it’s anything but imaginary: it’s as real as the imaginary part of the wavefunction. [I know that sounds a bit nonsensical, but… Well… Think about it. And read on!]

Back to that factor 1/2. As mentioned above, it also pops up when calculating the group and the phase velocity of the wavefunction. In fact, let me show you that calculation now. [Sorry. Just hang in there.] It goes like this.

The de Broglie relations tell us that the k and the ω in the ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt) wavefunction (i.e. the spatial and temporal frequency respectively) are equal to k = p/ħ, and ω = E/ħ. Let’s now think of that zero-mass particle once more, so we assume all of its energy is kinetic: no rest energy, no potential! So… If we now use the kinetic energy formula E = m·v2/2 – which we can also write as E = m·v·v/2 = p·v/2 = p·p/2m = p2/2m, with v = p/m the classical velocity of the elementary particle that Louis de Broglie was thinking of – then we can calculate the group velocity of our ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt) wavefunction as:

vg = ∂ω/∂k = ∂[E/ħ]/∂[p/ħ] = ∂E/∂p = ∂[p2/2m]/∂p = 2p/2m = p/m = v

[Don’t tell me I can’t treat m as a constant when calculating ∂ω/∂k: I can. Think about it.]

Fine. Now the phase velocity. For the phase velocity of our ei(kx − ωt) wavefunction, we find:

vp = ω/k = (E/ħ)/(p/ħ) = E/p = (p2/2m)/p = p/2m = v/2

So that’s only half of v: it’s the 1/2 factor once more! Strange, isn’t it? Why would we get a different value for the phase velocity here? It’s not like we have two different frequencies here, do we? Well… No. You may also note that the phase velocity turns out to be smaller than the group velocity (as mentioned, it’s only half of the group velocity), which is quite exceptional as well! So… Well… What’s the matter here? We’ve got a problem!

What’s going on here? We have only one wave here—one frequency and, hence, only one k and ω. However, on the other hand, it’s also true that the ei(kx − ωt) wavefunction gives us two functions for the price of one—one real and one imaginary: ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt). So the question here is: are we adding waves, or are we not? It’s a deep question. If we’re adding waves, we may get different group and phase velocities, but if we’re not, then… Well… Then the group and phase velocity of our wave should be the same, right? The answer is: we are and we aren’t. It all depends on what you mean by ‘adding’ waves. I know you don’t like that answer, but that’s the way it is, really. 🙂

Let me make a small digression here that will make you feel even more confused. You know – or you should know – that the sine and the cosine function are the same except for a phase difference of 90 degrees: sinθ = cos(θ + π/2). Now, at the same time, multiplying something with amounts to a rotation by 90 degrees, as shown below.

Hence, in order to sort of visualize what our ei(kx − ωt) function really looks like, we may want to super-impose the two graphs and think of something like this:

vision

You’ll have to admit that, when you see this, our formulas for the group or phase velocity, or our v = λ relation, do no longer make much sense, do they? 🙂

Having said that, that 1/2 factor is and remains puzzling, and there must be some logical reason for it. For example, it also pops up in the Uncertainty Relations:

Δx·Δp ≥ ħ/2 and ΔE·Δt ≥ ħ/2

So we have ħ/2 in both, not ħ. Why do we need to divide the quantum of action here? How do we solve all these paradoxes? It’s easy to see how: the apparent contradiction (i.e. the different group and phase velocity) gets solved if we’d use the E = m∙v2 formula rather than the kinetic energy E = m∙v2/2. But then… What energy formula is the correct one: E = m∙v2 or m∙c2? Einstein’s formula is always right, isn’t it? It must be, so let me postpone the discussion a bit by looking at a limit situation. If v = c, then we don’t need to make a choice, obviously. 🙂 So let’s look at that limit situation first. So we’re discussing our zero-mass particle once again, assuming it travels at the speed of light. What do we get?

Well… Measuring time and distance in natural units, so c = 1, we have:

E = m∙c2 = m and p = m∙c = m, so we get: E = m = p

Waw ! E = m = p ! What a weird combination, isn’t it? Well… Yes. But it’s fully OK. [You tell me why it wouldn’t be OK. It’s true we’re glossing over the dimensions here, but natural units are natural units and, hence, the numerical value of c and c2 is 1. Just figure it out for yourself.] The point to note is that the E = m = p equality yields extremely simple but also very sensible results. For the group velocity of our ei(kx − ωt) wavefunction, we get:

vg = ∂ω/∂k = ∂[E/ħ]/∂[p/ħ] = ∂E/∂p = ∂p/∂p = 1

So that’s the velocity of our zero-mass particle (remember: the 1 stands for c here, i.e. the speed of light) expressed in natural units once more—just like what we found before. For the phase velocity, we get:

vp = ω/k = (E/ħ)/(p/ħ) = E/p = p/p = 1

Same result! No factor 1/2 here! Isn’t that great? My ‘hidden energy theory’ makes a lot of sense.:-)

However, if there’s hidden energy, we still need to show where it’s hidden. 🙂 Now that question is linked to the propagation mechanism that’s described by those two equations, which now – leaving the 1/2 factor out, simplify to:

  1. Re(∂ψ/∂t) = −(ħ/m)·Im(∇2ψ)
  2. Im(∂ψ/∂t) = (ħ/m)·Re(∇2ψ)

Propagation mechanism? Yes. That’s what we’re talking about here: the propagation mechanism of energy. Huh? Yes. Let me explain in another separate section, so as to improve readability. Before I do, however, let me add another note—for the skeptics among you. 🙂

Indeed, the skeptics among you may wonder whether our zero-mass particle wavefunction makes any sense at all, and they should do so for the following reason: if x = 0 at t = 0, and it’s traveling at the speed of light, then x(t) = t. Always. So if E = m = p, the argument of our wavefunction becomes E·t – p·x = E·t – E·t = 0! So what’s that? The proper time of our zero-mass particle is zero—always and everywhere!?

Well… Yes. That’s why our zero-mass particle – as a point-like object – does not really exist. What we’re talking about is energy itself, and its propagation mechanism. 🙂

While I am sure that, by now, you’re very tired of my rambling, I beg you to read on. Frankly, if you got as far as you have, then you should really be able to work yourself through the rest of this post. 🙂 And I am sure that – if anything – you’ll find it stimulating! 🙂

The imaginary energy space

Look at the propagation mechanism for the electromagnetic wave in free space, which (for = 1) is represented by the following two equations:

  1. B/∂t = –∇×E
  2. E/∂t = ∇×B

[In case you wonder, these are Maxwell’s equations for free space, so we have no stationary nor moving charges around.] See how similar this is to the two equations above? In fact, in my Deep Blue page, I use these two equations to derive the quantum-mechanical wavefunction for the photon (which is not the same as that hypothetical zero-mass particle I introduced above), but I won’t bother you with that here. Just note the so-called curl operator in the two equations above (∇×) can be related to the Laplacian we’ve used so far (∇2). It’s not the same thing, though: for starters, the curl operator operates on a vector quantity, while the Laplacian operates on a scalar (including complex scalars). But don’t get distracted now. Let’s look at the revised Schrödinger’s equation, i.e. the one without the 1/2 factor:

∂ψ/∂t = i·(ħ/m)·∇2ψ

On the left-hand side, we have a time derivative, so that’s a flow per second. On the right-hand side we have the Laplacian and the i·ħ/m factor. Now, written like this, Schrödinger’s equation really looks exactly the same as the general diffusion equation, which is written as: ∂φ/∂t = D·∇2φ, except for the imaginary unit, which makes it clear we’re getting two equations for the price of one here, rather than one only! 🙂 The point is: we may now look at that ħ/m factor as a diffusion constant, because it does exactly the same thing as the diffusion constant D in the diffusion equation ∂φ/∂t = D·∇2φ, i.e:

  1. As a constant of proportionality, it quantifies the relationship between both derivatives.
  2. As a physical constant, it ensures the dimensions on both sides of the equation are compatible.

So the diffusion constant for  Schrödinger’s equation is ħ/m. What is its dimension? That’s easy: (N·m·s)/(N·s2/m) = m2/s. [Remember: 1 N = 1 kg·m/s2.] But then we multiply it with the Laplacian, so that’s something expressed per square meter, so we get something per second on both sides.

Of course, you wonder: what per second? Not sure. That’s hard to say. Let’s continue with our analogy with the heat diffusion equation so as to try to get a better understanding of what’s being written here. Let me give you that heat diffusion equation here. Assuming the heat per unit volume (q) is proportional to the temperature (T) – which is the case when expressing T in degrees Kelvin (K), so we can write q as q = k·T  – we can write it as:

heat diffusion 2

So that’s structurally similar to Schrödinger’s equation, and to the two equivalent equations we jotted down above. So we’ve got T (temperature) in the role of ψ here—or, to be precise, in the role of ψ ‘s real and imaginary part respectively. So what’s temperature? From the kinetic theory of gases, we know that temperature is not just a scalar: temperature measures the mean (kinetic) energy of the molecules in the gas. That’s why we can confidently state that the heat diffusion equation models an energy flow, both in space as well as in time.

Let me make the point by doing the dimensional analysis for that heat diffusion equation. The time derivative on the left-hand side (∂T/∂t) is expressed in K/s (Kelvin per second). Weird, isn’t it? What’s a Kelvin per second? Well… Think of a Kelvin as some very small amount of energy in some equally small amount of space—think of the space that one molecule needs, and its (mean) energy—and then it all makes sense, doesn’t it?

However, in case you find that a bit difficult, just work out the dimensions of all the other constants and variables. The constant in front (k) makes sense of it. That coefficient (k) is the (volume) heat capacity of the substance, which is expressed in J/(m3·K). So the dimension of the whole thing on the left-hand side (k·∂T/∂t) is J/(m3·s), so that’s energy (J) per cubic meter (m3) and per second (s). Nice, isn’t it? What about the right-hand side? On the right-hand side we have the Laplacian operator  – i.e. ∇= ·, with ∇ = (∂/∂x,  ∂/∂y,  ∂/∂z) – operating on T. The Laplacian operator, when operating on a scalar quantity, gives us a flux density, i.e. something expressed per square meter (1/m2). In this case, it’s operating on T, so the dimension of ∇2T is K/m2. Again, that doesn’t tell us very much (what’s the meaning of a Kelvin per square meter?) but we multiply it by the thermal conductivity (κ), whose dimension is W/(m·K) = J/(m·s·K). Hence, the dimension of the product is  the same as the left-hand side: J/(m3·s). So that’s OK again, as energy (J) per cubic meter (m3) and per second (s) is definitely something we can associate with an energy flow.

In fact, we can play with this. We can bring k from the left- to the right-hand side of the equation, for example. The dimension of κ/k is m2/s (check it!), and multiplying that by K/m(i.e. the dimension of ∇2T) gives us some quantity expressed in Kelvin per second, and so that’s the same dimension as that of ∂T/∂t. Done! 

In fact, we’ve got two different ways of writing Schrödinger’s diffusion equation. We can write it as ∂ψ/∂t = i·(ħ/m)·∇2ψ or, else, we can write it as ħ·∂ψ/∂t = i·(ħ2/m)·∇2ψ. Does it matter? I don’t think it does. The dimensions come out OK in both cases. However, interestingly, if we do a dimensional analysis of the ħ·∂ψ/∂t = i·(ħ2/m)·∇2ψ equation, we get joule on both sides. Interesting, isn’t it? The key question, of course, is: what is it that is flowing here?

I don’t have a very convincing answer to that, but the answer I have is interesting—I think. 🙂 Think of the following: we can multiply Schrödinger’s equation with whatever we want, and then we get all kinds of flows. For example, if we multiply both sides with 1/(m2·s) or 1/(m3·s), we get a equation expressing the energy conservation law, indeed! [And you may want to think about the minus sign of the  right-hand side of Schrödinger’s equation now, because it makes much more sense now!]

We could also multiply both sides with s, so then we get J·s on both sides, i.e. the dimension of physical action (J·s = N·m·s). So then the equation expresses the conservation of actionHuh? Yes. Let me re-phrase that: then it expresses the conservation of angular momentum—as you’ll surely remember that the dimension of action and angular momentum are the same. 🙂

And then we can divide both sides by m, so then we get N·s on both sides, so that’s momentum. So then Schrödinger’s equation embodies the momentum conservation law.

Isn’t it just wonderfulSchrödinger’s equation packs all of the conservation laws!:-) The only catch is that it flows back and forth from the real to the imaginary space, using that propagation mechanism as described in those two equations.

Now that is really interesting, because it does provide an explanation – as fuzzy as it may seem – for all those weird concepts one encounters when studying physics, such as the tunneling effect, which amounts to energy flowing from the imaginary space to the real space and, then, inevitably, flowing back. It also allows for borrowing time from the imaginary space. Hmm… Interesting! [I know I still need to make these points much more formally, but… Well… You kinda get what I mean, don’t you?]

To conclude, let me re-baptize my real and imaginary ‘space’ by referring to them to what they really are: a real and imaginary energy space respectively. Although… Now that I think of it: it could also be real and imaginary momentum space, or a real and imaginary action space. Hmm… The latter term may be the best. 🙂

Isn’t this all great? I mean… I could go on and on—but I’ll stop here, so you can freewheel around yourself. For  example, you may wonder how similar that energy propagation mechanism actually is as compared to the propagation mechanism of the electromagnetic wave? The answer is: very similar. You can check how similar in one of my posts on the photon wavefunction or, if you’d want a more general argument, check my Deep Blue page. Have fun exploring! 🙂

So… Well… That’s it, folks. I hope you enjoyed this post—if only because I really enjoyed writing it. 🙂

[…]

OK. You’re right. I still haven’t answered the fundamental question.

So what about  the 1/2 factor?

What about that 1/2 factor? Did Schrödinger miss it? Well… Think about it for yourself. First, I’d encourage you to further explore that weird graph with the real and imaginary part of the wavefunction. I copied it below, but with an added 45º line—yes, the green diagonal. To make it somewhat more real, imagine you’re the zero-mass point-like particle moving along that line, and we observe you from our inertial frame of reference, using equivalent time and distance units.

spacetime travel

So we’ve got that cosine (cosθ) varying as you travel, and we’ve also got the i·sinθ part of the wavefunction going while you’re zipping through spacetime. Now, THINK of it: the phase velocity of the cosine bit (i.e. the red graph) contributes as much to your lightning speed as the i·sinθ bit, doesn’t it? Should we apply Pythagoras’ basic r2 = x2 + yTheorem here? Yes: the velocity vector along the green diagonal is going to be the sum of the velocity vectors along the horizontal and vertical axes. So… That’s great.

Yes. It is. However, we still have a problem here: it’s the velocity vectors that add up—not their magnitudes. Indeed, if we denote the velocity vector along the green diagonal as u, then we can calculate its magnitude as:

u = √u2 = √[(v/2)2 + (v/2)2] = √[2·(v2/4) = √[v2/2] = v/√2 ≈ 0.7·v

So, as mentioned, we’re adding the vectors, but not their magnitudes. We’re somewhat better off than we were in terms of showing that the phase velocity of those sine and cosine velocities add up—somehow, that is—but… Well… We’re not quite there.

Fortunately, Einstein saves us once again. Remember we’re actually transforming our reference frame when working with the wavefunction? Well… Look at the diagram below (for which I  thank the author)

special relativity

In fact, let me insert an animated illustration, which shows what happens when the velocity goes up and down from (close to) −c to +c and back again.  It’s beautiful, and I must credit the author here too. It sort of speaks for itself, but please do click the link as the accompanying text is quite illuminating. 🙂

Animated_Lorentz_Transformation

The point is: for our zero-mass particle, the x’ and t’ axis will rotate into the diagonal itself which, as I mentioned a couple of times already, represents the speed of light and, therefore, our zero-mass particle traveling at c. It’s obvious that we’re now adding two vectors that point in the same direction and, hence, their magnitudes just add without any square root factor. So, instead of u = √[(v/2)2 + (v/2)2], we just have v/2 + v/2 = v! Done! We solved the phase velocity paradox! 🙂

So… I still haven’t answered that question. Should that 1/2 factor in Schrödinger’s equation be there or not? The answer is, obviously: yes. It should be there. And as for Schrödinger using the mass concept as it appears in the classical kinetic energy formula: K.E. = m·v2/2… Well… What other mass concept would he use? I probably got a bit confused with Feynman’s exposé – especially this notion of ‘choosing the zero point for the energy’ – but then I should probably just re-visit the thing and adjust the language here and there. But the formula is correct.

Thinking it all through, the ħ/2m constant in Schrödinger’s equation should be thought of as the reciprocal of m/(ħ/2). So what we’re doing basically is measuring the mass of our object in units of ħ/2, rather than units of ħ. That makes perfect sense, if only because it’s ħ/2, rather than ħthe factor that appears in the Uncertainty Relations Δx·Δp ≥ ħ/2 and ΔE·Δt ≥ ħ/2. In fact, in my post on the wavefunction of the zero-mass particle, I noted its elementary wavefunction should use the m = E = p = ħ/2 values, so it becomes ψ(x, t) = a·ei∙[(ħ/2)∙t − (ħ/2)∙x]/ħ = a·ei∙[t − x]/2.

Isn’t that just nice? 🙂 I need to stop here, however, because it looks like this post is becoming a book. Oh—and note that nothing what I wrote above discredits my ‘hidden energy’ theory. On the contrary, it confirms it. In fact, the nice thing about those illustrations above is that it associates the imaginary component of our wavefunction with travel in time, while the real component is associated with travel in space. That makes our theory quite complete: the ‘hidden’ energy is the energy that moves time forward. The only thing I need to do is to connect it to that idea of action expressing itself in time or in space, cf. what I wrote on my Deep Blue page: we can look at the dimension of Planck’s constant, or at the concept of action in general, in two very different ways—from two different perspectives, so to speak:

  1. [Planck’s constant] = [action] = N∙m∙s = (N∙m)∙s = [energy]∙[time]
  2. [Planck’s constant] = [action] = N∙m∙s = (N∙s)∙m = [momentum]∙[distance]

Hmm… I need to combine that with the idea of the quantum vacuum, i.e. the mathematical space that’s associated with time and distance becoming countable variables…. In any case. Next time. 🙂

Before I sign off, however, let’s quickly check if our a·ei∙[t − x]/2 wavefunction solves the Schrödinger equation:

  • ∂ψ/∂t = −a·ei∙[t − x]/2·(i/2)
  • 2ψ = ∂2[a·ei∙[t − x]/2]/∂x=  ∂[a·ei∙[t − x]/2·(i/2)]/∂x = −a·ei∙[t − x]/2·(1/4)

So the ∂ψ/∂t = i·(ħ/2m)·∇2ψ equation becomes:

a·ei∙[t − x]/2·(i/2) = −i·(ħ/[2·(ħ/2)])·a·ei∙[t − x]/2·(1/4)

⇔ 1/2 = 1/4 !?

The damn 1/2 factor. Schrödinger wants it in his wave equation, but not in the wavefunction—apparently! So what if we take the m = E = p = ħ solution? We get:

  • ∂ψ/∂t = −a·i·ei∙[t − x]
  • 2ψ = ∂2[a·ei∙[t − x]]/∂x=  ∂[a·i·ei∙[t − x]]/∂x = −a·ei∙[t − x]

So the ∂ψ/∂t = i·(ħ/2m)·∇2ψ equation now becomes:

a·i·ei∙[t − x] = −i·(ħ/[2·ħ])·a·ei∙[t − x]

⇔ 1 = 1/2 !?

We’re still in trouble! So… Was Schrödinger wrong after all? There’s no difficulty whatsoever with the ∂ψ/∂t = i·(ħ/m)·∇2ψ equation:

  • a·ei∙[t − x]/2·(i/2) = −i·[ħ/(ħ/2)]·a·ei∙[t − x]/2·(1/4) ⇔ 1 = 1
  • a·i·ei∙[t − x] = −i·(ħ/ħ)·a·ei∙[t − x] ⇔ 1 = 1

What these equations might tell us is that we should measure mass, energy and momentum in terms of ħ (and not in terms of ħ/2) but that the fundamental uncertainty is ± ħ/2. That solves it all. So the magnitude of the uncertainty is ħ but it separates not 0 and ± 1, but −ħ/2 and −ħ/2. Or, more generally, the following series:

…, −7ħ/2, −5ħ/2, −3ħ/2, −ħ/2, +ħ/2, +3ħ/2,+5ħ/2, +7ħ/2,…

Why are we not surprised? The series represent the energy values that a spin one-half particle can possibly have, and ordinary matter – i.e. all fermions – is composed of spin one-half particles.

To  conclude this post, let’s see if we can get any indication on the energy concepts that Schrödinger’s revised wave equation implies. We’ll do so by just calculating the derivatives in the ∂ψ/∂t = i·(ħ/m)·∇2ψ equation (i.e. the equation without the 1/2 factor). Let’s also not assume we’re measuring stuff in natural units, so our wavefunction is just what it is: a·ei·[E·t − p∙x]/ħ. The derivatives now become:

  • ∂ψ/∂t = −a·i·(E/ħ)·ei∙[E·t − p∙x]/ħ
  • 2ψ = ∂2[a·ei∙[E·t − p∙x]/ħ]/∂x=  ∂[a·i·(p/ħ)·ei∙[E·t − p∙x]/ħ]/∂x = −a·(p22ei∙[E·t − p∙x]/ħ

So the ∂ψ/∂t = i·(ħ/m)·∇2ψ = i·(1/m)·∇2ψ equation now becomes:

a·i·(E/ħ)·ei∙[E·t − p∙x]/ħ = −i·(ħ/m)·a·(p22ei∙[E·t − p∙x]/ħ  ⇔ E = p2/m = m·v2

It all works like a charm. Note that we do not assume stuff like E = m = p here. It’s all quite general. Also note that the E = p2/m closely resembles the kinetic energy formula one often sees: K.E. = m·v2/2 = m·m·v2/(2m) = p2/(2m). We just don’t have the 1/2 factor in our E = p2/m formula, which is great—because we don’t want it! :-) Of course, if you’d add the 1/2 factor in Schrödinger’s equation again, you’d get it back in your energy formula, which would just be that old kinetic energy formula which gave us all these contradictions and ambiguities. 😦

Finally, and just to make sure: let me add that, when we wrote that E = m = p – like we did above – we mean their numerical values are the same. Their dimensions remain what they are, of course. Just to make sure you get that subtle point, we’ll do a quick dimensional analysis of that E = p2/m formula:

[E] = [p2/m] ⇔ N·m = N2·s2/kg = N2·s2/[N·m/s2] = N·m = joule (J)

So… Well… It’s all perfect. 🙂

Post scriptum: I revised my Deep Blue page after writing this post, and I think that a number of the ideas that I express above are presented more consistently and coherently there. In any case, the missing energy theory makes sense. Think of it: any oscillator involves both kinetic as well as potential energy, and they both add up to twice the average kinetic (or potential) energy. So why not here? When everything is said and done, our elementary wavefunction does describe an oscillator. 🙂

Some content on this page was disabled on June 16, 2020 as a result of a DMCA takedown notice from The California Institute of Technology. You can learn more about the DMCA here:

https://en.support.wordpress.com/copyright-and-the-dmca/

The wavefunction of a zero-mass particle

Post scriptum note added on 11 July 2016: This is one of the more speculative posts which led to my e-publication analyzing the wavefunction as an energy propagation. With the benefit of hindsight, I would recommend you to immediately the more recent exposé on the matter that is being presented here, which you can find by clicking on the provided link. In fact, I actually made some (small) mistakes when writing the post below.

Original post:

I hope you find the title intriguing. A zero-mass particle? So I am talking a photon, right? Well… Yes and no. Just read this post and, more importantly, think about this story for yourself. 🙂

One of my acquaintances is a retired nuclear physicist. We mail every now and then—but he has little or no time for my questions: he usually just tells me to keep studying. I once asked him why there is never any mention of the wavefunction of a photon in physics textbooks. He bluntly told me photons don’t have a wavefunction—not in the sense I was talking at least. Photons are associated with a traveling electric and a magnetic field vector. That’s it. Full stop. Photons do not have a ψ or φ function. [I am using ψ and φ to refer to position or momentum wavefunction. You know both are related: if we have one, we have the other.] But then I never give up, of course. I just can’t let go out of the idea of a photon wavefunction. The structural similarity in the propagation mechanism of the electric and magnetic field vectors E and B just looks too much like the quantum-mechanical wavefunction. So I kept trying and, while I don’t think I fully solved the riddle, I feel I understand it much better now. Let me show you the why and how.

I. An electromagnetic wave in free space is fully described by the following two equations:

  1. B/∂t = –∇×E
  2. E/∂t = c2∇×B

We’re making abstraction here of stationary charges, and we also do not consider any currents here, so no moving charges either. So I am omitting the ∇·E = ρ/ε0 equation (i.e. the first of the set of four equations), and I am also omitting the j0 in the second equation. So, for all practical purposes (i.e. for the purpose of this discussion), you should think of a space with no charges: ρ = 0 and = 0. It’s just a traveling electromagnetic wave. To make things even simpler, we’ll assume our time and distance units are chosen such that = 1, so the equations above reduce to:

  1. B/∂t = –∇×E
  2.  E/∂t = ∇×B

Perfectly symmetrical! But note the minus sign in the first equation. As for the interpretation, I should refer you to previous posts but, briefly, the ∇× operator is the curl operator. It’s a vector operator: it describes the (infinitesimal) rotation of a (three-dimensional) vector field. We discussed heat flow a couple of times, or the flow of a moving liquid. So… Well… If the vector field represents the flow velocity of a moving fluid, then the curl is the circulation density of the fluid. The direction of the curl vector is the axis of rotation as determined by the ubiquitous right-hand rule, and its magnitude of the curl is the magnitude of rotation. OK. Next  step.

II. For the wavefunction, we have Schrödinger’s equation, ∂ψ/∂t = i·(ħ/2m)·∇2ψ, which relates two complex-valued functions (∂ψ/∂t and ∇2ψ). Complex-valued functions consist of a real and an imaginary part, and you should be able to verify this equation is equivalent to the following set of two equations:

  1. Re(∂ψ/∂t) = −(ħ/2m)·Im(∇2ψ)
  2. Im(∂ψ/∂t) = (ħ/2m)·Re(∇2ψ)

[Two complex numbers a + ib and c + id are equal if, and only if, their real and imaginary parts are the same. However, note the −i factor in the right-hand side of the equation, so we get: a + ib = −i·(c + id) = d −ic.] The Schrödinger equation above also assumes free space (i.e. zero potential energy: V = 0) but, in addition – see my previous post – they also assume a zero rest mass of the elementary particle (E0 = 0). So just assume E= V = 0 in de Broglie’s elementary ψ(θ) = ψ(x, t) = eiθ = a·e−i[(E+ p2/(2m) + V)·t − p∙x]/ħ wavefunction. So, in essence, we’re looking at the wavefunction of a massless particle here. Sounds like nonsense, doesn’t it? But… Well… That should be the wavefunction of a photon in free space then, right? 🙂

Maybe. Maybe not. Let’s go as far as we can.

The energy of a zero-mass particle

What m would we use for a photon? It’s rest mass is zero, but it’s got energy and, hence, an equivalent mass. That mass is given by the m = E/cmass-energy equivalence. We also know a photon has momentum, and it’s equal to its energy divided by c: p = m·c = E/c. [I know the notation is somewhat confusing: E is, obviously, not the magnitude of E here: it’s energy!] Both yield the same result. We get: m·c = E/c ⇔ m = E/c⇔ E = m·c2.

OK. Next step. Well… I’ve always been intrigued by the fact that the kinetic energy of a photon, using the E = m·v2/2 = E = m·c2/2 formula, is only half of its total energy E = m·c2. Half: 1/2. That 1/2 factor is intriguing. Where’s the rest of the energy? It’s really a contradiction: our photon has no rest mass, and there’s no potential here, but its total energy is still twice its kinetic energy. Quid?

There’s only one conclusion: just because of its sheer existence, it must have some hidden energy, and that hidden energy is also equal to E = m·c2/2, and so the kinetic and hidden energy add up to E = m·c2.

Huh? Hidden energy? I must be joking, right?

Well… No. No joke. I am tempted to call it the imaginary energy, because it’s linked to the imaginary part of the wavefunction—but then it’s everything but imaginary: it’s as real as the imaginary part of the wavefunction. [I know that sounds a bit nonsensical, but… Well… Think about it: it does make sense.]

Back to that factor 1/2. You may or may not remember it popped up when we were calculating the group and the phase velocity of the wavefunction respectively, again assuming zero rest mass, and zero potential. [Note that the rest mass term is mathematically equivalent to the potential term in both the wavefunction as well as in Schrödinger’s equation: (E0·t +V·t = (E+ V)·t, and V·ψ + E0·ψ = (V+E0)·ψ—obviously!]

In fact, let me quickly show you that calculation again: the de Broglie relations tell us that the k and the ω in the ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt) wavefunction (i.e. the spatial and temporal frequency respectively) are equal to k = p/ħ, and ω = E/ħ. If we would now use the kinetic energy formula E = m·v2/2 – which we can also write as E = m·v·v/2 = p·v/2 = p·p/2m = p2/2m, with v = p/m the classical velocity of the elementary particle that Louis de Broglie was thinking of – then we can calculate the group velocity of our ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt) as:

vg = ∂ω/∂k = ∂[E/ħ]/∂[p/ħ] = ∂E/∂p = ∂[p2/2m]/∂p = 2p/2m = p/m = v

[Don’t tell me I can’t treat m as a constant when calculating ∂ω/∂k: I can. Think about it.] Now the phase velocity. The phase velocity of our ei(kx − ωt) is only half of that. Again, we get that 1/2 factor:

vp = ω/k = (E/ħ)/(p/ħ) = E/p = (p2/2m)/p = p/2m = v/2

Strange, isn’t it? Why would we get a different value for the phase velocity here? It’s not like we have two different frequencies here, do we? You may also note that the phase velocity turns out to be smaller than the group velocity, which is quite exceptional as well! So what’s the matter?

Well… The answer is: we do seem to have two frequencies here while, at the same time, it’s just one wave. There is only one k and ω here but, as I mentioned a couple of times already, that ei(kx − ωt) wavefunction seems to give you two functions for the price of one—one real and one imaginary: ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt). So are we adding waves, or are we not? It’s a deep question. In my previous post, I said we were adding separate waves, but now I am thinking: no. We’re not. That sine and cosine are part of one and the same whole. Indeed, the apparent contradiction (i.e. the different group and phase velocity) gets solved if we’d use the E = m∙v2 formula rather than the kinetic energy E = m∙v2/2. Indeed, assuming that E = m∙v2 formula also applies to our zero-mass particle (I mean zero rest mass, of course), and measuring time and distance in natural units (so c = 1), we have:

E = m∙c2 = m and p = m∙c2 = m, so we get: E = m = p

Waw! What a weird combination, isn’t it? But… Well… It’s OK. [You tell me why it wouldn’t be OK. It’s true we’re glossing over the dimensions here, but natural units are natural units, and so c = c2 = 1. So… Well… No worries!] The point is: that E = m = p equality yields extremely simple but also very sensible results. For the group velocity of our ei(kx − ωt) wavefunction, we get:

vg = ∂ω/∂k = ∂[E/ħ]/∂[p/ħ] = ∂E/∂p = ∂p/∂p = 1

So that’s the velocity of our zero-mass particle (c, i.e. the speed of light) expressed in natural units once more—just like what we found before. For the phase velocity, we get:

vp = ω/k = (E/ħ)/(p/ħ) = E/p = p/p = 1

Same result! No factor 1/2 here! Isn’t that great? My ‘hidden energy theory’ makes a lot of sense. 🙂 In fact, I had mentioned a couple of times already that the E = m∙v2 relation comes out of the de Broglie relations if we just multiply the two and use the v = λ relation:

  1. f·λ = (E/h)·(h/p) = E/p
  2. v = λ ⇒ f·λ = v = E/p ⇔ E = v·p = v·(m·v) ⇒ E = m·v2

But so I had no good explanation for this. I have one now: the E = m·vis the correct energy formula for our zero-mass particle. 🙂

The quantization of energy and the zero-mass particle

Let’s now think about the quantization of energy. What’s the smallest value for E that we could possible think of? That’s h, isn’t it? That’s the energy of one cycle of an oscillation according to the Planck-Einstein relation (E = h·f). Well… Perhaps it’s ħ? Because… Well… We saw energy levels were separated by ħ, rather than h, when studying the blackbody radiation problem. So is it ħ = h/2π? Is the natural unit a radian (i.e. a unit distance), rather than a cycle?

Neither is natural, I’d say. We also have the Uncertainty Principle, which suggests the smallest possible energy value is ħ/2, because ΔxΔp = ΔtΔE = ħ/2.

Huh? What’s the logic here?

Well… I am not quite sure but my intuition tells me the quantum of energy must be related to the quantum of time, and the quantum of distance.

Huh? The quantum of time? The quantum of distance? What’s that? The Planck scale?

No. Or… Well… Let me correct that: not necessarily. I am just thinking in terms of logical concepts here. Logically, as we think of the smallest of smallest, then our time and distance variables must become count variables, so they can only take on some integer value n = 0, 1, 2 etcetera. So then we’re literally counting in time and/or distance units. So Δx and Δt are then equal to 1. Hence, Δp and ΔE are then equal to Δp = ΔE = ħ/2. Just think of the radian (i.e. the unit in which we measure θ) as measuring both time as well as distance. Makes sense, no?

No? Well… Sorry. I need to move on. So the smallest possible value for m = E = p would be ħ/2. Let’s substitute that in Schrödinger’s equation, or in that set of equations Re(∂ψ/∂t) = −(ħ/2m)·Im(∇2ψ) and Im(∂ψ/∂t) = (ħ/2m)·Re(∇2ψ). We get:

  1. Re(∂ψ/∂t) = −(ħ/2m)·Im(∇2ψ) = −(2ħ/2ħ)·Im(∇2ψ) = −Im(∇2ψ)
  2. Im(∂ψ/∂t) = (ħ/2m)·Re(∇2ψ) = (2ħ/2ħ)·Re(∇2ψ) = Re(∇2ψ)

Bingo! The Re(∂ψ/∂t) = −Im(∇2ψ) and Im(∂ψ/∂t) = Re(∇2ψ) equations were what I was looking for. Indeed, I wanted to find something that was structurally similar to the ∂B/∂t = –∇×and E/∂t = ∇×B equations—and something that was exactly similar: no coefficients in front or anything. 🙂

What about our wavefunction? Using the de Broglie relations once more (k = p/ħ, and ω = E/ħ), our ei(kx − ωt) = cos(kx−ωt) + i∙sin(kx−ωt) now becomes:

ei(kx − ωt) = ei(ħ·x/2 − ħ·t/2)/ħ = ei(x/2 − t/2) = cos[(x−t)/2] + i∙sin[(x−t)/2]

Hmm… Interesting! So we’ve got that 1/2 factor now in the argument of our wavefunction! I really feel I am close to squaring the circle here. 🙂 Indeed, it must be possible to relate the ∂B/∂t = –∇×E and ∂E/∂t = c2∇×B to the Re(∂ψ/∂t) = −Im(∇2ψ) and Im(∂ψ/∂t) = Re(∇2ψ) equations. I am sure it’s a complicated exercise. It’s likely to involve the formula for the Lorentz force, which says that the force on a unit charge is equal to E+v×B, with v the velocity of the charge. Why? Note the vector cross-product. Also note that ∂B/∂t and  ∂E/∂t are vector-valued functions, not scalar-valued functions. Hence, in that sense, ∂B/∂t and  ∂E/∂t and not like the Re(∂ψ/∂t) and/or Im(∂ψ/∂t) function. But… Well… For the rest, think of it: E and B are orthogonal vectors, and that’s  how we usually interpret the real and imaginary part of a complex number as well: the real and imaginary axis are orthogonal too!

So I am almost there. Who can help me prove what I want to prove here? The two propagation mechanisms are the “same-same but different”, as they say in Asia. The difference between the two propagation mechanisms must also be related to that fundamental dichotomy in Nature: the distinction between bosons and fermions. Indeed, when combining two directional quantities (i.e. two vectors), we like to think there are four different ways of doing that, as shown below. However, when we’re only interested in the magnitude of the result (and not in its direction), then the first and third result below are really the same, as are the second and fourth combination. Now, we’ve got pretty much the same in quantum math: we can, in theory, combine complex-valued amplitudes in four different ways but, in practice, we only have two (rather than four) types of behavior only: photons versus bosons.

vector addition

Is our zero-mass particle just the electric field vector?

Let’s analyze that ei(x/2 − t/2) = cos[(x−t)/2] + i∙sin[(x−t)/2] wavefunction some more. It’s easy to represent it graphically. The following animation does the trick:

Animation

I am sure you’ve seen this animation before: it represents a circularly polarized electromagnetic wave… Well… Let me be precise: it presents the electric field vector (E) of such wave only. The B vector is not shown here, but you know where and what it is: orthogonal to the E vector, as shown below—for a linearly polarized wave.

emwave2

Let’s think some more. What is that ei(x/2 − t/2) function? It’s subject to conceiving time and distance as countable variables, right? I am tempted to say: as discrete variables, but I won’t go that far—not now—because the countability may be related to a particular interpretation of quantum physics. So I need to think about that. In any case… The point is that x can only take on values like 0, 1, 2, etcetera. And the same goes for t. To make things easy, we’ll not consider negative values for x right now (and, obviously, not for t either). So we’ve got a infinite set of points like:

  • ei(0/2 − 0/2) = cos(0) + i∙sin(0)
  • ei(1/2 − 0/2) = cos(1/2) + i∙sin(1/2)
  • ei(0/2 − 1/2) = cos(−1/2) + i∙sin(−1/2)
  • ei(1/2 − 1/2) = cos(0) + i∙sin(0)

Now, I quickly opened Excel and calculated those cosine and sine values for x and t going from 0 to 14 below. It’s really easy. Just five minutes of work. You should do yourself as an exercise. The result is shown below. Both graphs connect 14×14 = 196 data points, but you can see what’s going on: this does effectively, represent the elementary wavefunction of a particle traveling in spacetime. In fact, you can see its speed is equal to 1, i.e. it effectively travels at the speed of light, as it should: the wave velocity is v = f·λ = (ω/2π)·(2π/k) = ω/k = (1/2)·(1/2) = 1. The amplitude of our wave doesn’t change along the x = t diagonal. As the Last Samurai puts it, just before he moves to the Other World: “Perfect! They are all perfect!” 🙂

graph imaginarygraph real

In fact, in case you wonder how the quantum vacuum could possibly look like, you should probably think of these discrete spacetime points, and some complex-valued wave that travels as it does in the illustration above.

Of course, that elementary wavefunction above does not localize our particle. For that, we’d have to add a potentially infinite number of such elementary wavefunctions, so we’d write the wavefunction as ∑ ajeiθj functions. [I use the symbol here for the subscript, rather than the more conventional i symbol for a subscript, so as to avoid confusion with the symbol used for the imaginary unit.] The acoefficients are the contribution that each of these elementary wavefunctions would make to the composite wave. What could they possibly be? Not sure. Let’s first look at the argument of our elementary component wavefunctions. We’d inject uncertainty in it. So we’d say that m = E = p is equal to

m = E = p = ħ/2 + j·ħ with j = 0, 1, 2,…

That amounts to writing: m = E = p = ħ/2, ħ, 3ħ/2, 2ħ, 5/2ħ, etcetera. Waw! That’s nice, isn’t it? My intuition tells me that our acoefficients will be smaller for higher j, so the aj(j) function would be some decreasing function. What shape? Not sure. Let’s first sum up our thoughts so far:

  1. The elementary wavefunction of a zero-mass particle (again, I mean zero rest mass) in free space is associated with an energy that’s equal to ħ/2.
  2. The zero-mass particle travels at the speed of light, obviously (because it has zero rest mass), and its kinetic energy is equal to E = m·v2/2 = m·c2/2.
  3. However, its total energy is equal to E = m·v= m·c2: it has some hidden energy. Why? Just because it exists.
  4. We may associate its kinetic energy with the real part of its wavefunction, and the hidden energy with its imaginary part. However, you should remember that the imaginary part of the wavefunction is as essential as its real part, so the hidden energy is equally real. 🙂

So… Well… Isn’t this just nice?

I think it is. Another obvious advantage of this way of looking at the elementary wavefunction is that – at first glance at least – it provides an intuitive understanding of why we need to take the (absolute) square of the wavefunction to find the probability of our particle being at some point in space and time. The energy of a wave is proportional to the square of its amplitude. Now, it is reasonable to assume the probability of finding our (point) particle would be proportional to the energy and, hence, to the square of the amplitude of the wavefunction, which is given by those aj(j) coefficients.

Huh?

OK. You’re right. I am a bit too fast here. It’s a bit more complicated than that, of course. The argument of probability being proportional to energy being proportional to the square of the amplitude of the wavefunction only works for a single wave a·eiθ. The argument does not hold water for a sum of functions ∑ ajeiθj. Let’s write it all out. Taking our m = E = p = ħ/2 + j·ħ = ħ/2, ħ, 3ħ/2, 2ħ, 5/2ħ,… formula into account, this sum would look like:

a1ei(x − t)(1/2) + a2ei(x − t)(2/2) + a3ei(x − t)(3/2) + a4ei(x − t)(4/2) + …

But—Hey! We can write this as some power series, can’t we? We just need to add a0ei(x − t)(0/2) = a0, and then… Well… It’s not so easy, actually. Who can help me? I am trying to find something like this:

power series

Or… Well… Perhaps something like this:

power series 2

Whatever power series it is, we should be able to relate it to this one—I’d hope:

power series 3

Hmm… […] It looks like I’ll need to re-visit this, but I am sure it’s going to work out. Unfortunately, I’ve got no more time today, I’ll let you have some fun now with all of this. 🙂 By the way, note that the result of the first power series is only valid for |x| < 1. 🙂

Note 1: What we should also do now is to re-insert mass in the equations. That should not be too difficult. It’s consistent with classical theory: the total energy of some moving mass is E = m·c2, out of which m·v2/2 is the classical kinetic energy. All the rest – i.e. m·c2 − m·v2/2 – is potential energy, and so that includes the energy that’s ‘hidden’ in the imaginary part of the wavefunction. 🙂

Note 2: I really didn’t pay much attentions to dimensions when doing all of these manipulations above but… Well… I don’t think I did anything wrong. Just to give you some more feel for that wavefunction ei(kx − ωt), please do a dimensional analysis of its argument. I mean, k = p/ħ, and ω = E/ħ, so check the dimensions:

  • Momentum is expressed in newton·second, and we divide it by the quantum of action, which is expressed in newton·meter·second. So we get something per meter. But then we multiply it with x, so we get a dimensionless number.
  • The same is true for the ωt term. Energy is expressed in joule, i.e. newton·meter, and so we divide it by ħ once more, so we get something per second. But then we multiply it with t, so… Well… We do get a dimensionless number: a number that’s expressed in radians, to be precise. And so the radian does, indeed, integrate both the time as well as the distance dimension. 🙂